null
/
Sale

Honeywell

Honeywell VR8205M8812 Direct Ignition Gas Valve, 24V [New]

Write a Review
$328.17
SKU:
B2E-LFX-160498
Availability:
In Stock - Ships Immediately
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Description

The VR8205M8812 is a 24 Vac direct ignition combination gas control from Honeywell's VR8205 series.

The VR8205 is Honeywell's 24 Vac direct ignition dual automatic valve combination gas control, documented in installation instructions form 68-0049 and the VR8105/VR8205/VR8305 family instructions form 69-1226. A direct ignition control has no pilot burner: the main burner is lit straight from a spark or hot surface igniter under the command of a separate ignition module, which proves the flame before the valve is allowed to remain open.

Within the family the VR8205 is the mid-sized body. Honeywell's capacity table rates it at 150 cf/h of natural gas at 1 in. wc pressure drop, with a regulation range of 20 to 200 cf/h - 200,000 Btuh at maximum regulation - against 85 cf/h for the smaller VR8105 and up to 415 cf/h for the largest VR8305. Minimum regulation on LP gas is 40,000 Btuh.

The letter after the family number matters. Honeywell states that the suffix indicates the ambient temperature range and the pressure regulator type, listed in Table 3 of the installation instructions. Across the closely related VR8204 intermittent pilot range the same letters denote a standard regulator (A), step-opening (C and P), slow opening (H), a wider −40 to +175°F ambient band (K and M), and two-stage operation (Q).

* Brand / Manufacturer: Honeywell
* Model Number: VR8205M8812
* Series: VR8105 / VR8205 / VR8305 Direct Ignition Combination Gas Controls
* Ignition Type: Direct ignition (hot surface or direct spark), no pilot burner
* Suffix Designation: M: wider ambient temperature band with standard regulator (per the matching VR8204 Table 3)
* Supply Voltage: 24 Vac, 60 Hz or 50/60 Hz by model
* Body Pattern: Straight through
* AGA Certified Capacity: 150 cf/h natural gas at 1 in. wc pressure drop (4.2 m³/h)
* Regulation Range: 20 to 200 cf/h natural gas; 40,000 Btuh minimum on LP
* Maximum Output: 200,000 Btuh at maximum regulation
* Capacity Basis: 1000 Btu/ft³, 0.64 specific gravity natural gas at 1 in. wc
* Gas Control Knob: Two position, ON and OFF
* Valve Content: Manual valve, two automatic operators and servo pressure regulator
* Pressure Taps: Inlet and outlet pressure taps provided
* Compatible Modules: S89C, S89E, S89F and S87 series 5 and later
* Condition: New

System notes. The valve is one part of a direct ignition system: the transformer, igniter, flame sensor, ignition module, limit controller and thermostat are ordered separately. Honeywell pairs these controls with the S89C, S89E and S89F modules and with S87 series 5 and later. Keep the igniter-sensor cable to 3 ft (0.9 m) or less, or flame detection becomes unreliable, and do not reverse L1 and L2 - that alone will prevent flame detection. The control contains no replaceable components and must not be dismantled.

Thread type needs checking on this one. Dash number 8812 falls in the 8000-series block that Honeywell uses for CE and export builds. On the CE models in this family the main valve connection is 1/2 in. ISO 7/1 internal parallel thread (BSP.PL) rather than NPT, and the servo regulator is rated to EN 88 Class C with a typical 9 mbar natural gas setting adjustable from 7.5 to 12.5 mbar, or 20 mbar on LP adjustable from 20 to 30 mbar. Thread type has deliberately not been stated in the specification above because it has not been confirmed for this dash number - a BSP body will not thread into NPT pipework. Confirm before ordering.

Honeywell / Honeywell

VR8205M8812 / VR8205M8812

VR8205M8812 / VR8205M8812

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/