null
/
Sale

Honeywell

Honeywell VR8205A2040 Direct Ignition Gas Valve, 24V [New]

Write a Review
$257.44
SKU:
B2E-LFX-160463
Availability:
In Stock - Ships Immediately
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Description

The VR8205A2040 is a 24 Vac direct ignition combination gas control from Honeywell's VR8205 series.

The VR8205 is a 24 Vac direct ignition dual automatic valve combination gas control, documented in Honeywell product data form 68-0049 and installation instructions form 69-1226. A direct ignition system has no pilot burner: the main burner is lit directly by a spark or hot surface igniter under the command of a separate ignition module, which proves the flame before allowing the valve to stay open. The control itself holds a manual valve, two automatic operators and a servo pressure regulator, and its knob has only two positions, ON and OFF.

Capacity and where this body sits in the family. Honeywell rates the VR8205 at 150 cf/h of natural gas at 1 in. wc pressure drop, with a regulation range from 20 cf/h up to 200 cf/h - equivalent to 200,000 Btuh at maximum regulation, and a 40,000 Btuh minimum on LP gas. The VR8105 below it is rated 85 cf/h and the VR8305 above it reaches 415 cf/h, so moving to a larger appliance means changing family number, not just dash number. Capacities are quoted on 1000 Btu/ft³, 0.64 specific gravity natural gas.

Reading the suffix letter. Honeywell states that on this family the letter indicates the ambient temperature range and the pressure regulator type, using the same scheme as the closely related intermittent pilot controls - where A is a standard regulator rated 0 to 175°F, H is slow-opening, C and P are step-opening, K and M carry the wider −40 to 175°F ambient band, and Q is two-stage. The direct ignition form carries its own version of that table, which has not been read here, so treat the letter meanings below as the family convention rather than a confirmed reading for this specific dash number.

* Brand / Manufacturer: Honeywell
* Model Number: VR8205A2040
* Series: VR8105 / VR8205 / VR8305 Direct Ignition Combination Gas Controls
* Ignition Type: Direct ignition (spark or hot surface), no pilot burner
* Pressure Regulator Type: A suffix: standard regulator (family convention)
* Supply Voltage: 24 Vac, 60 Hz or 50/60 Hz by model
* Body Pattern: Straight through; right-angle adapters available
* AGA Certified Capacity: 150 cf/h natural gas at 1 in. wc pressure drop (4.2 m³/h)
* Minimum Regulation: 20 cf/h natural gas (0.6 m³/h); 40,000 Btuh on LP gas
* Maximum Regulation: 200 cf/h natural gas (5.7 m³/h), equivalent to 200,000 Btuh
* Capacity Basis: 1000 Btu/ft³, 0.64 specific gravity natural gas at 1 in. wc pressure drop
* Gas Control Knob: Two position, ON and OFF
* Pressure Taps: Inlet and outlet pressure taps provided
* Compatible Modules: S89C, S89E, S89F and S87 series 5 and later direct ignition modules
* Gas Type: Supplied set for natural gas; convertible to LP by kit on convertible suffixes
* Condition: New

Module compatibility. These controls are designed to work with Honeywell S89C, S89E and S89F modules and with S87 series 5 and later. The valve is only part of the system: transformer, igniter, flame sensor, ignition module, limit controller and thermostat are all ordered separately, and the igniter-sensor cable must be kept to 3 ft (0.9 m) or less or flame detection becomes unreliable.

Do not attempt to dismantle the control. Honeywell states it contains no replaceable components, and attempted disassembly, repair or cleaning can damage it and cause gas leakage.

Supersession note: This dash number appears in distributor cross-reference listings among the parts superseded by the Resideo universal gas valve VR8345M4302. If you are replacing rather than matching, the universal valve may be the current route - but check it carefully against the appliance, because a universal valve covers hot surface, direct spark and intermittent pilot applications from one body and needs configuring rather than simply fitting.

Ordering note: Size and regulator setting for dash number 2040 are not individually published and have not been stated.

Honeywell / Honeywell

VR8205A2040 / VR8205A2040

VR8205A2040 / VR8205A2040

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/