Description
Series P215PR Direct-Mount Pressure-Actuated Condenser Fan Speed Controller for single-phase motors - IP65, phase-cutting speed control with fan cut-off below 30% output.
The Series P215PR/RM direct-mount and remote-mount pressure-actuated condenser fan speed controllers are designed for speed variation of single-phase motors. Head pressure control of a refrigeration system, through speed variation of the fan on an air-cooled condenser, results in optimum performance throughout the year. Once the output drops below 30%, the fan is cut off. The Series P215PR/RM controllers are designed for non-corrosive refrigerant systems.
A pressure-actuated control provides the most direct and fastest response to pressure variations in the refrigerant system. The controller varies the supply voltage to the motor from 30% to at least 95% over the proportional band using the phase-cutting principle. This principle provides speed variation of a permanent split capacitor or shaded pole motors that do not draw more than 4 A (RMS) full-load current. The motor manufacturer should have approved the product for this speed control principle.
Features and Benefits
* Fan speed variation condenser pressure control - creates optimum condenser pressure control all year round and reduces noise during colder periods (such as nights)
* Pressure input - allows direct and fast response to pressure variations
* Direct mount option - allows for easy installation
* Setpoint screw location on top of device - allows for easy setpoint adjustment after installation
* Built-in suppression filter - meets electro-magnetic compatibility requirements
* IP65 enclosure - allows for controller mounting outdoors
* Compact design - fits into small units and has a small turnaround circle
* Quick connector plug included - allows for easy wiring and quick replacement
* Pressure range 5-42 bar - allows compatibility with all HFC types from R134a to R410a
Installation (OEM)
The controller must be mounted in an upright position on the refrigerant line, preferably at the condenser outlet side, to reduce pressure pulsation as much as possible. Mount the controller within a 45° angle on both sides of the top of the high pressure line to avoid accumulation of oil inside the controller bellows and maintain the class IP65 rating. If you are using a pump-down system, the controller connection must be made at the high-pressure side of the system and upstream from the solenoid valve. The built-in EMC filter is designed for a maximum distance of 2 meters between the controller and the motor; non-shielded cable must be used. If the controller fails to operate within its specifications, replace the unit.
This product code is itemised in the OEM P215PR/RM Product Selection Chart (Table 2), so the range, element style, factory setting and proportional band below are OEM-documented values.
Specifications
* Brand / Manufacturer: Johnson Controls / PENN
* Model / Part Number: P215PR-9202
* Type: Series P215PR Direct-Mount Pressure-Actuated Condenser Fan Speed Controller for Single-Phase Motors
* Pressure Range (OEM): 22 to 42 bar
* Factory Setpoint (OEM): 26 bar (setpoint is defined at 90% output value and is field-adjustable via the setpoint screw)
* Proportional Band (OEM, at 50 Hz): 5.5 ± 1.5 bar
* Maximum Overrun Pressure (OEM): 48 bar
* Pressure Connection / Element Style (OEM): Style 47 (7/16-20 UNF female including valve depressor)
* Minimum Shipping Quantity (OEM): 1
* Control Action (OEM): Direct
* Main Supply Voltage (OEM): 230 VAC +8% / -15%, 50/60 Hz
* Maximum Output Voltage (OEM): ≥ 95% of supply voltage
* Cut-off Point (OEM): 30% of supply voltage (fan stops below 30% output)
* Maximum Current (OEM): 4 A RMS at maximum voltage output
* Minimum Current (OEM): ≥ 200 mA
* Residual Current, Motor (OEM): ≤ 25 mA
* Motor Power Factor (OEM): cosφ ≥ 0.6
* Operating Ambient Temperature (OEM): -40 to 55°C
* Storage Ambient (OEM): -40 to 85°C; 10 to 98% RH
* Enclosure (OEM): IP65
* Materials (OEM): Top/bottom glass-filled polycarbonate; aluminium heat sink; brass pressure connection; phosphor bronze bellows
* Wiring Connections (OEM): Screw terminals 1-1/2 mm² maximum; quick connector plug PG9 (6 to 7 mm cable)
* Shipping Weight (OEM): 0.3 kg (individual pack)
* Compliance (OEM): CE Mark - EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, RoHS 2002/95/EC, WEEE 2002/96/EC
* Note (OEM): 1 bar = 100 kPa ≈ 14.5 psi; proportional band values apply at 50 Hz and decrease by approximately 15% at 60 Hz
* Reference Documentation: Series P215PR/RM Product Bulletin, Order No. PD-P215PR-E, European Refrigeration Controls Catalogue Section 4
* Condition: New
Johnson Controls / Johnson Controls
P215PR-9202 / P215PR9202
P215PR-9202 / P215PR9202
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
