Description
The Johnson Controls M9210-GGC-3 is a direct-mount electric spring-return damper actuator - 89 lb·in (10 N·m), 24 VAC/VDC, proportional (modulating) control, with two integral line-voltage auxiliary switches. This is the top of the M9210 proportional range.
In Johnson Controls' words: "The M9210-xxx-3 Series Actuators are direct mount, spring return electric actuators that operate with these available power options: AC 24 V at 50/60 Hz or DC 24 V (AGx, BGx, GGx, HGx), AC 120 V at 60 Hz (BAx), AC 230 V at 50/60 Hz (BDx). The M9210-xxx-3 Series Electric Spring Return Actuators provide running and spring return torques of 89 lb·in (10 N·m). Integral line voltage auxiliary switches are available on the xxC models to indicate end-stop position, or to perform switching functions within the selected rotation range."
Published specification:
* Running torque: 89 lb·in (10 N·m)
* Spring return torque: 89 lb·in (10 N·m) - the same, with and without power
* Control: proportional (modulating)
* Supply: AC 24 V at 50/60 Hz, or DC 24 V
* Auxiliary switches: two, integral, line-voltage capable
* Shafts: round 1/2 to 3/4 in. (12 to 19 mm); square 3/8 and 1/2 in. (10, 12 and 14 mm)
* Electrical connection: 48 in. (1.2 m) 18 AWG appliance cable
* Jackshaft option: M9220-600 Jackshaft Coupler Kit, round 3/4 to 1-1/16 in. (19 to 27 mm)
Modulating control plus two hard contacts. If the sequence of operation asks for proportional positioning and an interlock - proving the damper open before a fan starts, or tripping an alarm at a set angle - this is the code that does both without an external limit switch bolted to the damper frame. Johnson Controls describes the contacts as available "to indicate end-stop position, or to perform switching functions within the selected rotation range", so they are not limited to the ends of travel. They are line-voltage capable, so they can drive a contactor coil directly from a 24 V actuator.
If you only need the controller to know the position, the M9210-GGA-3 is the same actuator for less. The switches earn their cost when something has to act independently of the control system - including when the control system is down.
Proportional, without adjustable zero and span. For sequencing two actuators from a single control signal you want the M9210-HGC-3, which adds adjustable zero and span and keeps the two switches.
Line voltage is not available on this control type. Johnson Controls offers 120 V and 230 V on the on/off BAx and BDx models only; the floating, proportional and adjustable zero-and-span M9210 models are all 24 V.
Check the shaft before you step up. The M9210 takes a 1/2 to 3/4 in. (12 to 19 mm) round shaft as standard, where the 70 lb·in M9208 starts at 5/16 in. The bigger actuator has a bigger minimum as well as a bigger maximum.
Spring return means fail-safe. Johnson Controls rates the full 89 lb·in both running and spring returning, so the spring drives the damper to its normal position with full torque.
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: M9210-GGC-3
* Torque: 89 lb·in (10 N·m), running and spring return
* Control: Proportional
* Adjustable zero & span: No - see the M9210-HGC-3
* Supply: AC 24 V / DC 24 V
* Auxiliary switches: 2, integral, line-voltage capable
* Spring return: Yes - fail-safe
* Condition: New
We stock the M9203, M9206, M9208, M9210, M9216 and M9220 spring-return ranges from 27 to 177 lb·in.
Johnson Controls / Johnson Controls
M9210-GGC-3 / M9210GGC3
M9210-GGC-3 / M9210GGC3
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
