Description
The Johnson Controls M9104-GGA-S is a direct-mount electric non-spring-return actuator - 35 lb·in (4 N·m), 24 V AC, with proportional control.
Please confirm the full part number with us before ordering. Every M9104 model in Johnson Controls' range carries a digit before the final S - -1S, -2S or -3S - and that digit is what identifies the connection method. Our record reads -S with no digit, so we believe a character has been dropped. Since the missing digit is precisely the part that tells you whether the actuator arrives with cables or terminal blocks, we have not stated a connection method for this unit.
What we can confirm. The rest of the code is unambiguous: M9104 is 35 lb·in (4 N·m) non-spring return, and GGA is proportional control with a selectable DC 0-10 V or DC 2-10 V input. Nominal travel time is 60 seconds at 60 Hz (72 seconds at 50 Hz) for 90°, and it mounts directly to a round shaft up to 1/2 in. (13 mm) or a 3/8 in. (10 mm) square shaft.
If you need a documented connection method, we have it. We hold the M9104-GGA-2S with plenum cables and the M9104-GGA-3S with terminal blocks - the same 35 lb·in proportional actuator, with the connection specified. If your documentation calls for one of those exact codes, order it directly and there is no ambiguity.
Where it is used. Compact synchronous motor-driven actuators for VAV boxes, VVT two-position zone applications, and small to medium-sized dampers.
Non-spring return: holds its last position on loss of power.
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: M9104-GGA-S (as held - a digit appears to be missing)
* Series: Johnson Controls M9104 Series electric non-spring-return actuators
* Torque: 35 lb·in (4 N·m)
* Control: Proportional, selectable DC 0-10 V or DC 2-10 V
* Supply: 24 V AC
* Connection: Not claimed - the identifying digit is missing from our record, please ask
* Travel Time: 60 s at 60 Hz for 90°
* Spring Return: No - holds last position
* Condition: New
We hold twelve M9104 Series actuators across floating, floating-with-auto-shut-off, proportional and line-voltage control, with cable and terminal block connections, plus the M9102 at 18 lb·in and the larger M9106 to M9116 Series up to 140 lb·in. Tell us the damper, the torque and the control signal and we will confirm the exact part from stock.
Johnson Controls / Johnson Controls
M9104-GGA-S / M9104GGAS
M9104-GGA-S / M9104GGAS
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
