Description
The VR8204C1092 is a 24 Vac intermittent pilot combination gas control from Honeywell's VR8204 series.
The VR8204 is a 24 Vac intermittent pilot dual automatic valve combination gas control, documented in Honeywell installation instructions form 69-1225 and product data form 68-0047. An intermittent pilot system lights its pilot on each call for heat and extinguishes it when the call ends, so no gas burns between cycles. The control combines a safety shutoff, a manual valve, two automatic operators, a servo pressure regulator and a pilot adjustment in one body, working alongside an intermittent pilot ignition module such as the S8600.
Reading the suffix letter. On this family the letter after the family number sets both the ambient temperature range and the type of pressure regulator fitted. Honeywell's Table 3 gives: A standard regulator, 0 to 175°F; C step-opening; H slow-opening; K and M the wider −40 to 175°F ambient band; P step-opening; Q two-stage; R a convertible valve; and U a nonregulating on/off type on CE models only. Two controls sharing a family number but carrying different letters are not interchangeable.
Step opening explained. A step-opening control effectively holds two pressure settings. On a call for heat it opens first to a reduced pressure, holds there briefly, then steps up to full rate. The result is a quieter, gentler light-up, and it is commonly specified on burners that would otherwise ignite harshly.
Check the conversion route before ordering a kit. Honeywell's published conversion table for this family covers the H, K and M suffixes (kits 393691 and 394588), the P suffix (not field convertible), the Q suffix (kits 396021 and 396025) and the R suffix (no kit needed, inherently convertible). The C suffix is not among them, and step-opening regulators on Honeywell gas controls are generally not field convertible - confirm with your supplier rather than assuming a kit exists.
* Brand / Manufacturer: Honeywell
* Model Number: VR8204C1092
* Series: VR8204 / VR8104 / VR8304 Intermittent Pilot Combination Gas Controls
* Ignition Type: Intermittent pilot
* Pressure Regulator Type: C suffix: step opening
* Ambient Temperature Range: 0 to 175°F (−18 to +79°C)
* Supply Voltage: 24 Vac, 60 Hz
* Current Draw: 0.5 A with both operators energised
* Body Pattern: Straight through
* Inlet / Outlet: 1/2 in. NPT (standard US construction)
* Pilot Connection: 7/16 in. thread for 1/4 in. pilot tube
* Pressure Rating: AGA rated 1/2 psi (3.5 kPa) inlet
* Regulation Range, Natural Gas: 3 to 5 in. wc (7.5 to 12.5 mbar) or 5 to 7 in. wc (12.5 to 17.5 mbar) by model
* Regulation Range, LP Gas: 8 to 12 in. wc (20 to 30 mbar)
* Endurance: 10,000 cycles manual valve; 200,000 cycles automatic valves
* Inlet Screen: Fine mesh, with pilot filter
* Pressure Taps: Inlet and outlet pressure taps provided
* Terminal Block: Orange, denoting intermittent pilot; 1/4 in. male quick-connect terminals
* Pipe Adapters: Angle and straight adapters available for 3/8, 1/2 and 3/4 in.
* Gas Conversion: See ordering note; the C suffix is not listed in the published conversion table
* Certification: AGA and CGA design certificate L2025006; Australian design certificate 4214; CE-0063AU1215
* Condition: New
Telling it apart on the bench: Honeywell colour-codes the wiring terminal block orange on the intermittent pilot family, against beige on the standing pilot VR8200 controls. The direct ignition VR8205 controls have no pilot tapping at all.
Ordering note: Capacity for dash number 1092 is not individually published. Two cross-checks for this row: row 431 lists a VR8204C1167, also step-opening, so the two are distinct builds of the same regulator type; and row 440 lists a VR8204V1092 carrying the same 1092 dash number on a different suffix letter. Confirm both part numbers against the supplier list before publishing, since one may be a transcription error for the other.
Honeywell / Honeywell
VR8204C1092 / VR8204C1092
VR8204C1092 / VR8204C1092
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/