null
/
Sale

Honeywell

Honeywell VR8304M4804 Intermittent Pilot Gas Valve, 24V [New]

Write a Review
$264.12
SKU:
B2E-LFX-160586
Availability:
In Stock - Ships Immediately
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Description

The VR8304M4804 is a 24 Vac intermittent pilot combination gas control from Honeywell's VR8304 series, built with a standard pressure regulator and rated for the wide −40°F to +175°F ambient range.

The VR8304 is the largest body in Honeywell's VR8104, VR8204 and VR8304 intermittent pilot family, documented in product data form 68-0108 and installation instructions form 69-1225. It is rated to 415 cf/h at 1 in. wc on natural gas, against 150 cf/h for the mid-range VR8204 and 85 cf/h for the VR8104.

An intermittent pilot control lights its pilot on each call for heat and shuts it off when the call ends, so nothing burns between cycles. The body contains a safety shutoff, a manual valve, two automatic operators, a servo pressure regulator and a pilot adjustment. Both automatic valves must open before gas reaches the burner and both close on loss of power, and the control works alongside an intermittent pilot ignition module such as the S8600.

What the M suffix means on this family. Honeywell's Table 3 in form 69-1225 pairs the M letter with a standard pressure regulator and the wider ambient temperature band of −40°F to +175°F (−40°C to +79°C). The standard letters such as A cover only 0°F to +175°F. Standard opening means the second automatic valve reaches its regulated outlet pressure without a deliberate ramp or delay - under two seconds - while the wide band is what qualifies the valve for genuinely cold service: rooftop units, outdoor makeup air, unheated warehouses, agricultural buildings. On a cold morning an indoor-rated valve is working outside its published range, which is why the M variants exist alongside the A.

* Brand / Manufacturer: Honeywell
* Model Number: VR8304M4804
* Series: VR8304 Intermittent Pilot Dual Automatic Valve Combination Gas Controls
* Ignition Type: Intermittent pilot
* Regulator Type: M suffix: standard pressure regulator
* Opening Characteristic: Standard opening, under 2 seconds
* Ambient Temperature Range: −40°F to +175°F (−40°C to +79°C)
* Supply Voltage: 24 Vac, 60 Hz
* Current Draw: 0.5 A with both operators energised
* Body Pattern: Straight through
* Family Capacity: Up to 415 cf/h at 1 in. wc pressure drop on natural gas
* Pressure Rating: AGA rated 1/2 psi (3.5 kPa) inlet
* Regulation Range, Natural Gas: 3 to 5 in. wc (7.5 to 12.5 mbar) or 5 to 7 in. wc (12.5 to 17.5 mbar) by model
* Regulation Range, LP Gas: 8 to 12 in. wc (20 to 30 mbar)
* Pilot Connection: 7/16 in. thread for 1/4 in. pilot tube
* Endurance: 10,000 cycles manual valve; 200,000 cycles automatic valves
* Inlet Screen: Fine mesh, with pilot filter
* Terminal Block: Orange, denoting intermittent pilot; 1/4 in. male quick-connect terminals
* Pipe Adapters: Angle and straight adapters available for 3/8, 1/2 and 3/4 in.
* Gas Conversion: Field convertible: kit 393691 natural to LP, kit 394588 LP to natural
* Certification: AGA and CGA design certificate L2025006; Australian design certificate 4214; CE-0063AU1215
* Condition: New

Bench identification: the wiring terminal block is colour-coded orange across this intermittent pilot family. The standing pilot VR8300 controls on rows 476 to 478 and the VR8200 controls on rows 412 to 420 use a beige block - the fastest way to confirm the right ignition type before fitting.

Ordering note on size: Honeywell does not publish inlet and outlet sizes against individual dash numbers in this family, so none is claimed above. CE models use 1/2 in. or 3/4 in. ISO 7/1 internal thread (BSP.PL) or 1/2 in. and 3/4 in. NPT, and the CE VR8304 carries valve classification C plus D. Confirm the connection type before ordering - a BSP body will not thread into NPT pipework.

Ordering note: Dash number 4804 is the highest of the eight VR8304M controls stocked here and is not individually documented. It sits close to the VR8304K numbers 4806 and 4814 on rows 483 and 484 - same family, different suffix, and in that case a different published temperature pairing. Confirm the letter as well as the digits when picking or substituting.

Honeywell / Honeywell

VR8304M4804 / VR8304M4804

VR8304M4804 / VR8304M4804

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/