![Toshiba 0252SDJR41M-P 25 HP 3600 RPM JM Close-Coupled Pump [New]](https://cdn11.bigcommerce.com/s-hdj6s/images/stencil/500x659/products/68288/139708/d8e53a77-e9f3-5237-914b-df4ae8c9ca51__98031.1789963140.jpg?c=2 "Toshiba 0252SDJR41M-P 25 HP 3600 RPM JM Close-Coupled Pump [New]")
Description
The Toshiba 0252SDJR41M-P is an EQP Global® JM close-coupled pump motor, totally enclosed fan cooled (TEFC), NEMA Premium® efficiency: 25 HP, 3600 RPM (2-pole), 3-phase, 60 Hz, 230/460 V, NEMA 284JM frame, C-face footed with JM pump shaft, 1.15 service factor, cast iron construction.
Toshiba's EQP Global® definite purpose close-coupled pump motor series is built on the EQP Global SD severe duty platform with a NEMA JM shaft extension, C-face mounting and feet for direct coupling to close-coupled centrifugal pumps. The JM shaft carries the pump impeller directly, eliminating the coupling and baseplate alignment of a frame-mounted pump. Building on over 20 years of success with the EQPIII motor series, the EQP Global® SD design provides enhancements on the rotor, frame, brackets, fan, and bearings for long life in continuous pump duty.
Key Features
* Rating: 25 HP, 3600 RPM, 230/460 V, 3-phase, 60 Hz
* Frame: NEMA JM close-coupled pump, C-face footed
* Construction: cast iron; TEFC; IP55; 1.15 SF
* Torque: meets or exceeds NEMA Design B torque levels; high torque designs prevent stalling under heavy loads and voltage sags
* Bearings: over-sized 300 series bearings on drive and non-drive end, extending life up to ten times
* Inverter duty: insulation system meets NEMA MG1 Part 31, withstands 2000 V spikes in 0.1 µs; 20:1 CT / 60:1 VT speed range (143T-326T)
* Thermal: Class F insulation with Class H varnish and magnet wire; very low temperature rise at rated conditions
* Nameplate: 304 stainless steel; dual-frequency 50/60 Hz listed
Applications
* Close-coupled centrifugal pumps for water, HVAC and process service
* Booster, circulation and oil field pumping
Manufactured by Toshiba International Corporation, Houston, Texas. Series text from Toshiba EQP Global® product literature; verify frame, voltage and mounting against the motor nameplate.. Toshiba. Toshiba Corporation. 0252SDJR41M-P.
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
