Name: Toshiba 0054XSSB44A-P 5 HP 1800 RPM EQP 840 C-Face Footless [New]
Brand: Toshiba
SKU: KFP-4873871
Price: 1808.04 USD
Availability: InStock

Description

The Toshiba 0054XSSB44A-P is an EQP Global® 840 severe duty motor rated 5 HP, 1800 RPM, 3-phase, 60 Hz, 460 V, TEFC, NEMA 184TC frame, C-face footless. Toshiba's general purpose, totally enclosed fan cooled, NEMA Premium® efficiency, EQP Global® 840 motor series is Toshiba's next-generation motor product line. These motors specifically address the needs of the mill and chemical industries, incorporating many key features of an IEEE-841 motor.

Building on over 20 years of success with the EQPIII motor series, the EQP Global® 840 features design enhancements on the rotor, frame, brackets, fan, and bearings. The EQP Global series motors meet or exceed NEMA Design B torque levels. High torque designs prevent motors from stalling under heavy loaded applications and electrical problems such as voltage sags. Toshiba uses over-sized, 300 series bearings on both the drive end and non-drive end. Oversized bearings allow the EQP Global series motors to last up to ten times longer. These motors operate with very low temperature rise at rated conditions, giving them a wide thermal margin and extended motor life. Low temperature rise and oversized 300 series bearings extend life in continuous process duty.

Key Features

* Rating: 5 HP, 1800 RPM, 3-phase, 60 Hz, 460 V
* Frame/mount: NEMA 184TC, C-face footless
* Enclosure: TEFC, IP55; IEEE 841-style severe duty features
* Efficiency: NEMA Premium®
* Construction: cast-iron frame, brackets, conduit box and fan cover; 304 stainless steel nameplate
* Bearings: oversized 300 series bearings on both drive end and non-drive end
* Insulation: Class F system with Class H varnish and magnet wire; meets NEMA MG1 Part 31, withstands 2000 V spikes in 0.1 μs
* Torque: meets or exceeds NEMA Design B; 1.15 service factor
* Inverter duty: 20:1 constant torque / 60:1 variable torque

Applications

* Chemical, petrochemical and refinery process pumps
* Pulp and paper mills, steel mills and continuous process fans and blowers

Manufactured by Toshiba International Corporation. Data per Toshiba EQP Global® 840 series literature; verify full-load amps against the nameplate.. Toshiba. Toshiba Corporation. 0054XSSB44A-P.

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/