Description
The Johnson Controls TE-6000-6 is a 1,000 ohm nickel temperature sensing element from the Johnson Controls TE-6000 Series.
The TE-6000 Series elements typically work with TE-6001 hardware assemblies to satisfy a wide variety of temperature-sensing applications. All models have nickel elements except the TE-6359-1 platinum element model. Elements and hardware are usually ordered separately and field assembled to suit the desired application. The Johnson Controls installation instructions name the TE-6000-6 among the 1,000-ohm nickel elements (TE-6000-1, -6, -10, -11, -100 and -101), whose designated resistance values are published in the temperature-versus-resistance table: 885 ohms at 30°F (-1°C), 1,000 ohms at 70°F (21°C), 1,216 ohms at 140°F (60°C) and 1,597 ohms at 250°F (121°C).
Installation and setup (from the Johnson Controls instructions)
* TE-6000 elements are not position sensitive; mount them in any position
* maintain maximum physical distance between AC power and the element when wiring in a common panel, to avoid AC pickup which may disrupt proper controller operation
* the sensors do not require field adjustment; if system adjustments are needed, refer to the controller's instructions
* leads on some of the elements have a colour-coded band to aid identification
* Brand / Manufacturer: Johnson Controls
* Model Number: TE-6000-6
* Product Type: Temperature sensing element
* Series: TE-6000 Series Temperature Sensing Elements
* Element Material: Nickel
* Nominal Resistance: 1,000 ohms at 70°F (21°C)
* Condition: New surplus
CAUTION: Risk of Property Damage. Do not apply power to the system before checking all wiring connections. Short circuited or improperly connected wires may result in permanent damage to the equipment. IMPORTANT: the TE-6000 Series Temperature Sensing Element is intended to provide an input to equipment under normal operating conditions; where failure or malfunction of the temperature element could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. For mounting hardware refer to the TE-6001 Hardware Assemblies for TE-6000 Temperature Elements Product/Technical Bulletin (LIT-216300); for factory assembled units refer to the TE-6100 Series Product/Technical Bulletin (LIT-216310).
Johnson Controls / Johnson Controls
TE-6000-6 / TE60006
TE-6000-6 / TE60006
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/