Description
The Johnson Controls T-3610-1 is a pneumatic low limit thermostat from the T-3610 Series.
The T-3610 Pneumatic Low Limit Thermostat is a low volume controller designed to maintain a minimum air temperature. Pneumatic feedback is incorporated into the controller design to provide an exact proportional relationship between the measured temperature and the control pressure. Models are available for unit ventilator duct mounting applications with an 8 ft (244 cm) liquid filled averaging element or an 18 in. (46 cm) liquid filled rigid stem element. Both elements provide air temperature control with minimum variation in response to the average temperature sensed by the element.
As the temperature at the element increases or decreases, the liquid in the element expands or contracts and moves a diaphragm in the controller. This diaphragm movement is transmitted through a system of levers to open or close a control port. The pressure increases or decreases accordingly and the feedback diaphragm along with the element provides an accurate linear response in direct proportion to the sensed temperature change.
* Brand / Manufacturer: Johnson Controls
* Model Number: T-3610-1
* Series: T-3610 Pneumatic Low Limit Thermostat
* Type: Low volume proportional pneumatic controller, low limit
* Control Port: Ball type, for increased accuracy
* Lever: Reinforced edges for increased linearity
* Adjustment: Adjustable sensitivity and set point dial; each dial graduation represents 2 F°
* Test Point: Integral hypodermic needle test point
* Factory Calibration: 57°F (14°C) at 8 psig (56 kPa)
* Element Options (series): 8 ft (244 cm) liquid filled averaging, or 18 in. (46 cm) liquid filled rigid stem
* Replacement Cover: T-5210-602
Note: the -1 dash number is not itemised in the current T-3610 selection chart, which lists only the -1001, -1002 and -1003 models. The element type and mounting bracket supplied with this specific dash are therefore not claimed above - confirm before ordering. Field repairs must not be made; for a replacement T-3610, contact the nearest Johnson Controls branch office.
Johnson Controls
Johnson Controls
T-3610-1
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
