Description
The Johnson Controls T-3110-1 is a valve top thermostat and integral actuator - a combination pneumatic thermostat and valve actuator that mounts directly on the valve it controls. The -1 dash is the direct acting version with a bulb element and an external adjustment dial.
Johnson Controls illustrates the model as the "T-3110 Valve Top Thermostat and Integral Actuator with External Adjustment Dial and Bulb Element" and its selection table lists the T-3110 as valve top mounted for single pressure applications. As a valve top instrument it provides proportional control of a valve on a terminal air conditioning unit without a separate remote thermostat, so the temperature sensing element, setpoint dial and actuator are all part of one assembly.
The adjusting dial is graduated in 1F° increments. Be sure each T-3110 thermostat has a 0.007 in. in-line restrictor installed in the supply air connection; the "T" fitting with .007 in. restrictor R-3710-3107 is the replacement restrictor "T" for T-3100, T-3110, T-3200 and T-3250 thermostats. In most cases a bulb element will be installed in the return air chamber of the unit, behind the protective screen or grille and in a location where normal maintenance may be performed on the unit without interference, using holder T-275-100.
* Brand / Manufacturer: Johnson Controls
* Model Number: T-3110-1
* Series: T-3110 Series Valve Top Thermostats / Actuators
* Type: Valve top thermostat with integral actuator
* Action (Proportional): Direct Acting (DA)
* Element: Bulb, liquid filled
* Set Point Adjustment: External adjustment dial
* Mounting: Valve Top
* Application: Single Pressure
* Restrictor Requirement: 0.007 in. in-line restrictor in the supply air connection
* Optional: Valve position indicator
Supersession: per the Johnson Controls T-3100, T-3200, and T-3300 Series Controllers Product/Technical Bulletin, the T-3111 and T-3311 are direct replacements for the T-3110 and T-3310 Series Valve Top Actuators. The equivalent current code for this configuration is the T-3111-1 (Direct Acting, External Set Point, Bulb Element).
Johnson Controls
Johnson Controls
T-3110-1
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
