Name: Johnson Controls P70M-1 Dual Pressure Lockout Control [New]
Brand: Johnson Controls
SKU: B2E-LFX-166865
Price: 278.07 USD
Availability: InStock

Description

The Johnson Controls P70M-1 is a PENN P70 Series dual pressure control - a single SPST control that provides combined high and low pressure protection for a compressor. Per the manufacturer, the P70, P72 and P170 Controls for Dual Pressure Applications "provide combined high and low pressure control of compressors on commercial refrigeration and air conditioning applications," and the P70L, M and N models "have a Single-Pole Single-Throw (SPST) switch... available with automatic or manual reset lockout options."

One control handles both sides of the system: the low-pressure side cuts out on falling suction pressure with an adjustable differential, while the high-pressure side cuts out on rising head pressure. On this model the high-pressure side uses a Manual Reset Lockout, which "does not allow the pressure control to reset automatically after CUT OUT is reached, and provides shutdown capability for unmonitored equipment." These controls are available in several pressure ranges and are compatible with most common refrigerants. NEMA 1 enclosures are standard on most models.

* Brand / Manufacturer: Johnson Controls (PENN)
* Model / Part Number: P70M-1
* Series: P70 Series controls for dual pressure applications
* Switch Action: SPST (single-pole, single-throw)
* Low Pressure Side - Range: 20 in. Hg to 100 psig (-68 to 690 kPa)
* Low Pressure Side - Differential: Adjustable, minimum 6 psi (41 kPa) / maximum 50 psi (345 kPa)
* High Pressure Side - Range: 100 to 500 psig (690 to 3,447 kPa)
* High Pressure Side - Differential (non-adjustable): Lockout - requires manual reset
* Pressure Connector: 36 in. (0.9 m) capillary with 1/4 in. flare nut
* Limited Knob Adjustment: None
* Maximum Overpressure (non-recurring): Low side 325 psig (2,241 kPa) all-range; high side 525 psig (3,620 kPa)
* Maximum Working Pressure: Low side 100 psig (690 kPa); high side 500 psig (3,447 kPa)
* Refrigerant Compatibility: Most common non-corrosive refrigerants
* Note on this part number: 'P70M-1' is incomplete - PENN dual pressure model codes carry an enclosure letter after the switch letter (for example P70MA-1, which Johnson Controls itemises in the dual pressure bulletin Table 3 and catalog Table 171). The data above is that published for the P70MA-1; verify the full model number on the control nameplate before ordering
* Electrical Ratings (SPST, P70L/M/N types): 120 VAC - 1.5 hp, 20 FLA, 120 LRA; 208 VAC - 3 hp, 18.7 FLA, 112.2 LRA; 240 VAC - 3 hp, 17 FLA, 102 LRA; 480 VAC - 5 FLA, 30 LRA; 600 VAC - 4.8 FLA, 28.8 LRA (480 and 600 VAC ratings are not for compressor motor loads). Non-inductive 22 A at 120 to 240 VAC; hermetic compressor rating 20 FLA / 120 LRA at 208/240 VAC; pilot duty 125 VA at 120 to 600 VAC, 57.5 VA at 120 to 300 VDC
* Enclosure: NEMA 1 - galvanized steel case, plated and painted steel cover
* Dimensions (H x W x D): 3-1/4 x 5-11/16 x 2-1/16 in. (83 x 144 x 53 mm)
* Shipping Weight: 3.5 lb (1.6 kg), individual pack
* Ambient Conditions: -40 to 140°F (-40 to 60°C)
* Accessories: 271-51 Universal Mounting Bracket (supplied with standard controls)
* Agency Listings: High pressure side (only) UL Listed as a Refrigeration Pressure Limiting Control. For listing information on specific models, Johnson Controls directs enquiries to PENN Refrigeration Application Engineering

Typical duty is compressor control on commercial refrigeration and air conditioning systems. Except for models listed as refrigeration pressure limiting controls, use this control only as an operating control - where failure or malfunction could lead to personal injury or property damage, incorporate additional supervisory, alarm, safety or limit devices into the control system. Use copper conductors only and wire in accordance with local and national electrical codes. Do not make field repairs; contact a Johnson Controls/PENN authorized representative for replacement.. Johnson Controls. Johnson Controls. P70M-1.

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/