Description
P33 Series pressure switch - differential/gas pressure switch for air and non-aggressive gases, for burner and ventilation pressure proving.
The Johnson Controls P33 Series pressure switches sense low pressures of air and non-aggressive gases. The OEM bulletin for the P33G models shows the switch in a typical gas burner installation alongside the pressure regulator, pilot and safety valves, pressure test points, pilot and main burner, ignition electrode and flame sensor - the switch proves gas or air pressure in that train and signals the burner control.
The switch has a rectangular housing designed for panel or duct mounting, with a high pressure connection and provision for direct or back mounting using the optional bracket.
Applications
* Gas pressure proving in burner control trains
* Air pressure and differential pressure proving in heating and ventilation plant
* Low pressure monitoring of combustion air supply
This product code is itemised in the OEM P33G ordering table, so the setpoint range and differential below are OEM-documented values.
Specifications
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: P33GB-9300
* Type: P33G Series pressure switch
* Setpoint Range (OEM): 1.4 to 10 mbar (140 to 1,000 Pa)
* Differential (OEM): Less than 0.5 mbar
* Related OEM Model: P33GB-9400, 6 to 50 mbar, differential less than 2.0 mbar
* Media: Air and non-aggressive gases
* High Pressure Connection (OEM): Rp 1/4
* Mounting (OEM): Mounting holes for maximum 4 mm screws; two threaded holes M4 x 7 mm deep for back mounting, to be used when installing on the BKT024N001R bracket
* Accessory (OEM): "L" bracket, part no. BKT024N001R
* Reference Documentation: Product Bulletin P33G, Order No. PD-P33G-E, European Refrigeration Controls Catalogue Section 6
* Condition: New
Johnson Controls / Johnson Controls
P33GB-9300 / P33GB9300
P33GB-9300 / P33GB9300
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/