Description
Johnson Controls P300 Series differential pressure sensor - oil pressure sensing element for P345 and P445 Series electronic lube oil controls.
The P300 Series is the differential pressure sensor used with Johnson Controls electronic lube oil controls. The OEM literature for the electronic lube oil control range identifies the WHA-P300-xxx three-wire wiring harness as the harness supplied with the P345 or P445 control and the P300 sensor, confirming that the P300 is the sensing element in that system rather than a stand-alone switch.
In this arrangement the sensor is mounted at the compressor and measures the difference between oil pump discharge pressure and crankcase pressure (net oil pressure). The electronic control monitors that signal and, if net oil pressure is not established or is lost for longer than the control's lube oil time delay, de-energizes the compressor and locks out until it is manually reset.
Applications
* Net lube oil pressure sensing on pressure-lubricated refrigeration compressors
* Replacement sensor for P345 and P445 Series electronic lube oil control systems
DASH NUMBER NOT OEM-DOCUMENTED. No Johnson Controls selection chart publishing the P300AD-1C product code could be located. The open point (differential pressure), electrical output, pressure connection and wiring harness length for this dash number are therefore NOT claimed below. For comparison, the OEM electronic lube oil control literature publishes open points for the related P400 series switches (for example P400AD-2 at 12.75 ±0.75 psid, P400BD-1 at 10 ±1.5 psid and P400AD-1 at 7 ±1.0 psid), which indicates the order of magnitude but must not be applied to this part. Read the model number and setting from the sensor label, and match the sensor to the control it will be used with.
Specifications
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: P300AD-1C
* Type: P300 Series differential pressure (lube oil) sensor for electronic lube oil controls
* Used With (OEM): P345 and P445 Series electronic lube oil controls, via a WHA-P300-xxx three-wire harness
* Open Point (Differential Pressure): Not documented for this dash number - read from the sensor label
* Pressure Connection: Not documented for this dash number - confirm against the compressor fitting
* Repair (OEM): Do not attempt field repairs or calibration; switches, alternate length wiring harnesses and replacement controls are available as separate items through local Johnson Controls wholesalers and the original equipment manufacturer
* Condition: New
Johnson Controls / Johnson Controls
P300AD-1C / P300AD1C
P300AD-1C / P300AD1C
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/