Description
P128 Series Lube Oil Pressure Cutout Control with Time Delay - adjustable 8 to 70 psig, 90 second time delay, manual reset.
The P28 and P128 Series Controls provide dependable low pressure lube oil cut-out for pressure lubricated refrigeration compressors. The P128 Series offer adjustable range settings.
Use these controls for lube oil cutout on hermetic and semi-hermetic compressors used in commercial air-conditioning and commercial and industrial refrigeration systems. The P128 Control measures pressure available to circulate oil through the lubrication system. Net oil pressure is the difference between oil gauge and crankcase pressure.
The P128 and P145 controls feature a 1/4 in. external flare pressure connection which may be used with a refrigerant hose or cap tube such as SEC99 UltraCap.
Features
* Ambient compensated time delay relay
* Trip-free manual reset
* Industry standard
* P128 is fully adjustable throughout its range
* Direct-reading scale indication
* Adjustable setpoint
* Replacement timing relays available
* Dust-protected switch
Specifications
* Brand / Manufacturer: Johnson Controls / PENN
* Model / Part Number: P128AA-1E
* Type: P128 Series Lube Oil Pressure Cutout Control with Time Delay
* Time Delay (OEM, P128AA-1C base): 90 seconds
* Heater Circuit (OEM): 120/240 VAC
* Type of Reset (OEM): Manual
* Adjustable Range (OEM): 8 to 70 psig (55 to 483 kPa)
* Refrigerant (OEM): Non-corrosive
* Pressure Connection (OEM): 1/4 in. external flared connection
* Cross-Reference (OEM): The P128AA-1C is the replacement for the P28AA-1 and replaces Ranco P30-3701
* Dash Number Note: The Johnson Controls selection chart lists the 90 second model as the P128AA-1C. The -1E dash shares the same base; the E suffix is not itemised in the chart, so confirm the construction option against the unit
* Accessories (OEM): Some controls are supplied less mounting brackets. If brackets are required, order kit number BKT38A-600, which contains five 271-51 angle mounting brackets with screws, or BKT38A-601 which contains one mounting bracket with screws. SEC99 UltraCap Hose must be ordered separately
* Reference Documentation: P28 and P128 Series Lube Oil Control with Built-in Time Delay Relay Product Bulletin, Code No. LIT-125420; P28 Series Lube Oil Pressure Cutout Control (With Time Delay) Catalog Page, LIT-1927185
* Condition: New
Johnson Controls / Johnson Controls
P128AA-1E / P128AA1E
P128AA-1E / P128AA1E
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
