Description
P10 Series Low Range Pressure Control - single stage, for pneumatic air signal applications.
The P10 Series low pressure controls are for applications in which a pneumatic air signal is used to operate an electric or electronic device. Typical applications include: pressure-electric switches in pneumatic systems, control of pumps or small air compressors, and pressure-electric interlock of fluid flow systems. The P10BJ models are available for electric heating applications. All P10 Series low pressure controls are designed for use only as operating controls.
A change in operating pressure positions a preformed Buna-N diaphragm which actuates an electrical switch. Controls with SPDT contacts have color coded terminals; the common terminal is red; the red to yellow terminals close an electrical circuit on a rise in pressure; the red to blue terminals close a circuit on a drop in pressure.
The standard pressure connection, which is screwed into the control's 1/8 in. NPSF threads, is a barbed fitting for 1/4 in. polytubing. The P10 can be mounted in any position using bracket BKT16A-600, which is standard on models with barbed fitting.
Features
* Screw terminals are easily accessible for field wiring.
* Snap-acting contacts in a dust protected enclosure.
* Field adjustment can be made with cover on or removed.
* Visible calibration scale.
* Oil resistant Nylon reinforced Buna-N diaphragm.
Specifications
* Brand / Manufacturer: Johnson Controls / PENN
* Model / Part Number: P10BC-30
* Type: P10 Series Low Range Pressure Control
* RANGE AND FACTORY SETTING NOT DOCUMENTED: The -30 dash number does not appear in the Johnson Controls P10 selection chart. For reference the charted P10BC model is the P10BC-7C: 1 stage, Single-Pole Double-Throw (SPDT), range 3 to 20 psi (21 to 138 kPa), factory setting 12 psig (R to Y cut-in), switch differential 2 psi, barbed fitting - but no equivalence to the -30 dash is implied. Read the range and setting from the control's calibration scale before fitting
* Pressure Connector: Barbed fitting for 1/4 in. polytubing, screwed into 1/8 in. NPSF threads (standard)
* Maximum Allowable Pressure: 150 psig (1,034 kPa)
* Maximum Ambient Temperature: 140°F (60°C)
* Electrical Ratings (P10BC-7, motor ratings): 120 VAC - 16.0 A AC full load, 96.0 A AC locked rotor; 208 VAC - 9.2 A / 55.2 A; 240 VAC - 8.0 A / 48.0 A; 277 VAC - 7.0 A / 42.0 A; non-inductive 16.0 A / 9.2 A / 8.0 A / 7.2 A; pilot duty 125 VA, 24 to 277 VAC
* Mounting: Universal mounting bracket No. BKT16A-600 supplied as standard on models with barbed fitting; can be mounted in any position
* Reference Documentation: P10 Series Low Range Pressure Controls Product Bulletin, Code No. LIT-125400
* Condition: New
Johnson Controls / Johnson Controls
P10BC-30 / P10BC30
P10BC-30 / P10BC30
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
