Name: Johnson Controls P100AA-3 Encapsulated Pressure Switch [New]
Brand: Johnson Controls
SKU: B2E-TRO-21770
Price: 128.34 USD
Availability: InStock

Description

P100 Series Encapsulated Pressure Control, factory-calibrated, non-adjustable.

The P100 Series Encapsulated Pressure Controls are compact, economical, direct-mount, snap-action, On/Off pressure controls, available in a wide variety of factory-calibrated, non-adjustable pressure setpoints. The P100 controls are designed primarily for direct or pilot duty control of motors and other refrigeration or air conditioning application loads requiring precise, repeatable pressure control over a wide range of ambient conditions.

A bowed, stainless steel, snap-acting disc reverses its curvature when pressurized to the specified actuation setpoint. When the disc snaps, it drives a set of electrical contacts open or closed, depending on the control's switch action. When the applied pressure returns to the specified deactuation setpoint on automatic reset controls, the snap-acting disc and electrical contacts return to their original postion.

Standard P100 models come with 1/4 in. SAE female flare fitting with integral Schrader valve depressor and 48 in., No. 18 American Wire Guage (AWG) insulated, stranded-copper wire leads.

Specifications

* Brand / Manufacturer: Johnson Controls / PENN
* Model / Part Number: P100AA-3
* Type: P100 Series Encapsulated Pressure Control
* Switch Action: Open on Pressure Drop (low pressure), automatic reset - the switch action denoted by the A prefix in the P100 selection chart
* SETPOINTS NOT DOCUMENTED: The P100AA sub-family does not appear in the Johnson Controls P100 selection charts, which list the current P100AC, P100AP, P100CC, P100CP, P100DA and P100DC models. For reference, the equivalent dash number in the successor AP range, the P100AP-3C, is a condenser fan cycling model rated 150 psi (1,034 kPa) opens / 225 psi (1,551 kPa) closes - but the AA to AP dash-number equivalence is NOT confirmed by Johnson Controls. Read the setpoints from the control label before fitting
* Pressure Connection: 1/4 in. SAE female flare fitting with integral Schrader valve depressor
* Wire Leads: 48 in., No. 18 AWG insulated, stranded-copper
* Electrical Ratings: 120 and 240 VAC at 50/60 Hz
* Burst Pressure: 3500 psi (24,130 kPa)
* Maximum Overpressure: 250 psi (1724 kPa) for P100 controls with 5 to 100 psi (34 to 690 kPa) working pressure; 600 psi (4137 kPa) for P100 controls with 100 to 500 psi (690 to 3447 kPa) working pressure
* Refrigerant Temperature: -65 to 275°F (-54 to 135°C)
* Ambient Temperature: Operating -20 to 150°F (-29 to 66°C); Shipping -40 to 185°F (-40 to 85°C)
* Dielectric Strength: 750 Vrms across open contacts; 1550 Vrms (minimum) terminals to fitting
* Agency Listings: UL Recognition (US) File SA516, CCN SDFY2; UL Recognition (Canada) File SA516, CCN SDFY8
* Installation Caution (OEM): Do not overtighten flare nuts on pressure connection fittings - overtightening flare connections may damage the threads on the flare nuts or flare fittings
* Reference Documentation: P100 Series Encapsulated Pressure Controls Installation Bulletin, Code No. LIT-125511
* Condition: New. Johnson Controls. Johnson Controls. P100AA-3.

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/