Description
The Johnson Controls M9220-BDA-1 is a direct-mount electric spring-return damper actuator from the M9220 Series - 177 lb·in (20 N·m), AC 230 V line voltage, on/off (two-position) control, with no auxiliary switches.
Confirmed from the BDA letters and from specifications Johnson Controls states for the whole series:
* Running and spring return torque: 177 lb·in (20 N·m) - the same, with and without power
* Control: on/off (two-position)
* Supply: AC 230 V at 50/60 Hz - the D in the code is the 230 V supply letter
* Rotation range: mechanically limited to 90°; adjustable 30 to 90° with the optional M9220-603 stop kit
* Shafts: round 1/2 to 3/4 in. (12 to 19 mm); square 3/8 and 1/2 in. (10, 12 and 14 mm), standard clamp included
* Auxiliary switches: none
* Spring return: yes - fail-safe, full rated torque with and without power
This is a 230 volt actuator - read the middle letter. Johnson Controls states the M9220 supply options plainly: "AC 24 V at 50/60 Hz or DC 24 V (AGx, BGx, GGx, HGx), AC 120 V at 60 Hz (BAx), AC 230 V at 50/60 Hz (BDx)." M9220-BGA is 24 V, M9220-BAA is 120 V and M9220-BDA is 230 V. All look identical. D is the one people get wrong, because it suggests nothing - and a code that gives no hint is a code people assume.
Please confirm the cable and timing with us before ordering. Johnson Controls' M9220 ordering table lists twelve models and every one of them ends -3: AGA-3, AGC-3, BAA-3, BAC-3, BDA-3, BDC-3, BGA-3, BGC-3, GGA-3, GGC-3, HGA-3 and HGC-3. This item is labelled -1, a tail that does not appear in that table.
The BDA letters are documented and everything above follows from them or from series-wide statements, so it holds regardless of the tail. What we have not stated is the run time, spring return time, current draw or cable - those are published against the -3 models, and on an undocumented variant they are exactly the figures most likely to differ. The catalogued M9220-BDA-3 runs 24 to 57 seconds, spring returns in 11 to 15 seconds at room temperature, draws 0.15 A and carries a 48 in. (1.2 m) halogen-free cable. Send us a photo of the nameplate and we will confirm before anything ships.
The voltage itself is not in doubt. In this range the supply is carried by the second letter, and Johnson Controls has a dedicated code for each of the three voltages. A BD code is a 230 V part whatever the tail says - so this is a fitment question, not a voltage one. Treat it as 230 V and wire it accordingly.
Two-position only. Powered open, spring closed. Line voltage is offered on the on/off models only; the floating, proportional and adjustable zero-and-span M9220 models are all 24 V.
Spring return means fail-safe. The full 177 lb·in is rated both running and spring returning, so the spring closes the damper against its seal rather than letting it drift back. Direction is set by mounting: side A face away from the damper gives counter-clockwise spring return, side B away gives clockwise.
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: M9220-BDA-1
* Torque: 177 lb·in (20 N·m), running and spring return
* Control: On/off (two-position)
* Supply: AC 230 V, 50/60 Hz - line voltage
* Auxiliary switches: None
* Run time / cable: Please confirm - see note above
* Spring return: Yes - fail-safe
* Condition: New
We stock the M9203, M9206, M9208, M9210, M9216 and M9220 spring-return ranges from 27 to 177 lb·in, in 24 V, 120 V and 230 V. Tell us what the label says and we will match it.
Johnson Controls / Johnson Controls
M9220-BDA-1 / M9220BDA1
M9220-BDA-1 / M9220BDA1
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
