Description
The Johnson Controls M9206-GGA-2S is a direct-mount electric spring-return damper actuator - 53 lb·in (6 N·m), AC/DC 24 V, proportional control on a DC 0(2) to 10 V signal, with plenum-rated cable, a 25 to 40 second stroke and no auxiliary switch.
In Johnson Controls' words: "The M9206-xxx-2S Series Actuators are direct-mount, spring return electric actuators intended for use with on/off, floating, or proportional controllers. BGx models operate on AC 24 V power, AGx and GGx models operate on AC/DC 24 V power, and BAx models operate on AC 120 V power. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 1/2 in. (13 mm) in diameter, or a square shaft up to 3/8 in. (10 mm). The M9206-xxx-2S Series Electric Spring Return Actuators provide a running torque of 53 lb·in (6 N·m). Position feedback is provided on proportional control models through a proportional DC voltage signal."
Published specification:
* Running torque: 53 lb·in (6 N·m)
* Control input: DC 0(2) to 10 V, or 0(4) to 20 mA with a field-furnished 500 ohm 0.25 W minimum resistor
* Factory setting: DC 0 to 10 V, clockwise rotation with signal increase
* Action: switch-selectable direct or reverse
* Position feedback: proportional DC voltage signal
* Supply: AC 24 V ±25% at 50/60 Hz, Class 2, typically 12.0 VA running and 5.0 VA holding; or DC 24 V ±10%
* Rotation time: 25 to 40 seconds
* Rotation range: mechanically adjustable
* Shafts: round up to 1/2 in. (13 mm) diameter; square up to 3/8 in. (10 mm)
* Electrical connection: 48 in. (1.2 m) 18 AWG UL CMP plenum-rated cable with 1/4 in. (6 mm) stripped wire leads
* Auxiliary switch: none - see the M9206-GGB-2S
* Valve mounting: VG1000 Series forged brass ball valves via M9000-513 or M9000-520 linkage kit
Plenum-rated cable, on the proportional model. The GGA-2S ships with UL CMP plenum-rated cable, which is what allows it to be installed in environmental air spaces such as the void above a hung ceiling. The on/off models in the same series ship with standard halogen-free AWM cable instead. If the actuator is going above a ceiling that handles return air, the cable rating is not optional - check it before substituting a cheaper code.
Important: this is the -2S, not the -2. Johnson Controls has published two generations of the M9206 under near-identical codes. This one strokes in 25 to 40 seconds. If you are replacing a failed unit on a commissioned sequence, match the suffix - and note the earlier M9206-GGA-2 also accepts a 6 to 9 VDC input for legacy pneumatic-to-electric panels, which this model is not published as supporting. If your panel drives 6-9 V, ask us before ordering the -2S.
The 500 ohm resistor is field-furnished. For 4-20 mA operation Johnson Controls specifies a "field furnished 500 ohm, 0.25 W minimum resistor" - it is not supplied in the box. Tell us if you are wiring a current loop and we will include one.
Set up on the actuator, not in the panel. The unit is "factory set at DC 0...10 V, CW rotation with signal increase", with "switch selectable direct or reverse action" - so a reversed sequence is a switch setting rather than a re-wire or a different part number. "Automatic stroke calibration at installation" means the actuator learns its own travel limits, which Johnson Controls says "reduces installation time and costs".
Proportional, not two-position. If your controller only has a switched output, the on/off M9206-BGx-2S is cheaper and faster at 10 to 40 seconds; for tri-state floating control from a triac or relay, the M9206-AGx-2S.
Spring return means fail-safe. The actuator returns to its normal position on loss of power, and the reversible mounting design enables the actuator to spring return in either direction - set by which way you mount it.
Other features, in the manufacturer's words: "simple direct coupling reduces installation and commissioning time while improving reliability by eliminating damper linkages. Single screw coupling provides three-point shaft gripping"; a "removable coupler adapts to a shorter damper shaft"; and "electronic stall detection throughout entire rotation range extends the life of the actuator by deactivating the actuator motor when an overload condition is detected."
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: M9206-GGA-2S
* Series: M9206-xxx-2S Series electric spring-return actuators
* Torque: 53 lb·in (6 N·m)
* Control: Proportional, DC 0(2) to 10 V / 0(4) to 20 mA
* Feedback: Proportional DC voltage signal
* Supply: AC/DC 24 V
* Rotation time: 25 to 40 seconds
* Auxiliary switch: None - see the M9206-GGB-2S
* Cable: 48 in. (1.2 m), 18 AWG UL CMP plenum rated
* Spring return: Yes - fail-safe
* Condition: New
We stock the M9203, M9206, M9208 and M9220 spring-return ranges from 27 to 177 lb·in, in both the -2 and -2S generations, plus ball valve linkages, mounting kits and weathershields.
Johnson Controls / Johnson Controls
M9206-GGA-2S / M9206GGA2S
M9206-GGA-2S / M9206GGA2S
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/