Description
The Johnson Controls M9109-AGC-2 is a direct-mount electric non-spring-return actuator with on/off and floating control and two auxiliary switches, 24 V.
Decoded from the model number: M9109 series non-spring return; A = on/off and floating control; G = 24 V supply; C = dual auxiliary switches fitted.
The two auxiliary switches are dry contacts that change state at adjustable points in the travel, giving end-of-travel confirmation independent of the control signal - so you can prove a damper reached its position rather than assume it followed the command. Typical uses are interlocking a fan so it cannot start until the damper is proven open, signalling position back to a BAS as a digital point, or driving an indicator lamp.
Please ask us to confirm the torque. Johnson Controls publishes torque figures for the surrounding models - the M9108 at 70 lb·in (8 N·m), the M9116 at 140 lb·in (16 N·m), the M9124 at 210 lb·in and the M9132 at 280 lb·in - but the M9109 is not covered by that bulletin and we have not located a published figure for it. Torque is the first thing you size an actuator on, so we would rather read the unit for you than infer it. Tell us the damper and we will confirm before you order.
The M9109 is documented in accessory and valve service. Johnson Controls' M9000-160 anti-rotation bracket is specified for the M9106 and M9109 Series among others, and the M9000-520 ball valve linkage is documented for M9109 actuators on VG1241, VG1245, VG1841 and VG1845 Series ball valves. We stock both.
Non-spring return: holds its last position on loss of power.
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: M9109-AGC-2
* Series: Johnson Controls M9109 Series electric non-spring-return actuators
* Control: On/off and floating
* Auxiliary Switches: Two fitted
* Supply: 24 V
* Torque: Not claimed - no published figure for the M9109, please contact us
* Spring Return: No - holds last position
* Condition: New
We hold three M9109 Series actuators plus the M9102, M9104, M9106, M9108 and M9116 Series from 18 to 140 lb·in, and brackets, linkages, jackshaft kits and mounting accessories. Tell us the damper or valve, the torque, the control signal and whether you need position confirmation and we will match it from stock.
Johnson Controls / Johnson Controls
M9109-AGC-2 / M9109AGC2
M9109-AGC-2 / M9109AGC2
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
