Description
The Johnson Controls HE-68-0N00WS is an HE-6800 Series room humidity transmitter with temperature sensor - a wall-mounted unit with occupant controls, not a plain sensor.
The transmitter includes a manual override pushbutton and LED, a setpoint input and a Zone Bus terminal, allowing an occupant to adjust the space while the unit reports to the controller. The relative humidity output is 0 to 10 VDC on terminal 9, switchable to 0 to 5 VDC by DIP switch (0-10 VDC is the factory default). Supply is 24 VAC, with a DIP switch to select the power supply range; +15 VDC operation applies only when connected to a VMA controller. A three-position DIP switch sets the LED mode to ON, OFF or NO PB to match the controller. It is designed for mounting on an interior partition wall about 5 ft above the floor.
Within the HE-6800 Series the model code identifies the temperature sensor type and the humidity accuracy grade of a given unit; both are shown on the unit's label and should be confirmed when matching an existing installation. Documented controller compatibility covers AHU, UNT1100, VAV1xx/UNT1xx, VMA12 Series and VMA14 Series controllers. Wallbox mounting requires accessory NS-WALLPLATE-0, ordered separately.
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: HE-68-0N00WS
* Series: HE-6800 Humidity Transmitters with Temperature Sensor
* Product Type: Room humidity transmitter with temperature sensor and occupant controls
* Output: 0-10 VDC on terminal 9, DIP-switchable to 0-5 VDC (0-10 VDC default)
* Supply: 24 VAC (DIP-selectable range; +15 VDC only with VMA controller)
* Occupant Controls: Manual override pushbutton with LED, setpoint, Zone Bus
* LED Mode: Three-position DIP switch - ON / OFF / NO PB
* Mounting: Wall, interior partition, approx. 5 ft above floor
* Required Accessory: NS-WALLPLATE-0 for wallbox mounting (ordered separately)
* Ambient: 32 to 131°F (0 to 55°C), 10 to 95% RH noncondensing, 86°F max dew point
* Construction: Shock and vibration resistant
* Controller Compatibility: AHU, UNT1100, VAV1xx/UNT1xx, VMA12 Series, VMA14 Series
* OEM Documentation: Part No. 24-10409-28 Rev. F (April 2018)
* Condition: New
Typical applications include room and zone humidity control with occupant override in commercial HVAC systems, and replacement of HE-6800 series transmitters in existing installations.
Johnson Controls / Johnson Controls
HE-68-0N00WS / HE680N00WS
HE-68-0N00WS / HE680N00WS
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/