. . . . . The FX-WRZ Series One-to-One Wireless Room Sensing System is designed to interface with supported Facility Explorer BACnet?« FX-PC Series controllers to provide wireless control of singlezone, room temperature, humidity, and occupancy applications. The FX-WRZ Series Sensor and FX-WRZ7860 Receiver combination is a functional equivalent to a network sensor, such as an NSBTP7001-0 network sensor, but eliminates communication wiring, which is usually placed inside the wall. A simple One-to-One wireless room sensing system consists of one to five FX-WRZ Series Wireless Room Sensors that communicate single-zone temperature and humidity data to an associated FXWRZ7860 Receiver.
An FX-WRZ7860 Receiver interfaces with a single Facility Explorer FX-PCV or FX-PCG Controller. See FX-WRZ Series Wireless Room Sensors for more information on the FX-WRZ Series Sensors . Note: Multiple FX-WRZ Series Sensor models, a single model FX-WRZ7860 Receiver, and the FXWRZSST-120 Wireless Sensing System Tool are available. All of these components have 10 mW transmission power. The receiver meets the Institute of Electrical and Electronic Engineers (IEEE) 802.15.4 standard for low power, low duty cycle Radio Frequency (RF) transmitting systems and operates on the 2.4 GHz Industrial, Scientific, Medical (ISM) band. The One-to-One wireless room sensing system is designed for indoor applications only and should not be used for outdoor or inter-building applications.
The FX-WRZ Series Sensors and the FX-WRZ7860 Receiver operate as transceivers to create a bidirectional association between the sensors and the receivers that allows the sensing system to confirm data transmissions between the devices. The sensors and receivers must be located and installed properly to provide adequate RF signal strength to maintain this wireless association. The maximum transmission range for indoor line-of-sight transmissions between an FX-WRZ Series Sensor and an associated FX-WRZ7860 Receiver is 150 ft (45 m).
Taking into consideration RF signal absorption and reflection due to metal obstructions, walls, and furniture found in typical building interiors, the practical average indoor line-of-sight transmission range between a sensor and receiver is 100 ft (30 m). See Related Documentation for references to installation instructions. To extend the range, use an FX-ZFRRPTK-H1 Series Wireless Field Bus Router and an FX-ZFRRPTKH1 Power Supply. Using a repeater can help extend the transmission range through or around obstacles if theline-of-sight installation is not possible.. Johnson Controls. Johnson Controls. FX-WRZ7860-0.
Warranty Information
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (Products) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERS SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
![Johnson Controls FX-WRZ7860-0 One-to-One Wireless Receiver [New]](https://cdn11.bigcommerce.com/s-hdj6s/images/stencil/500x659/products/66076/131559/6a7f5c1d-c40e-50a8-b618-d4913a5837b4__70737.1779574053.jpg?c=2 "Johnson Controls FX-WRZ7860-0 One-to-One Wireless Receiver [New]")
