Name: Johnson Controls D-3153-40 Pneumatic Damper Actuator [New]
Brand: Johnson Controls
SKU: B2E-LFX-168690
Price: 417.57 USD
Availability: InStock

Description

. . . . . This item is a Johnson Controls D-3153-40 pneumatic piston damper actuator.

The D-3153 is a multipurpose positioning device used to operate ventilating dampers in response to the output of a pneumatic controller or electro-pneumatic transducer. Air pressure from the controller acts on the actuator diaphragm, driving the piston against the internal spring and the load. The series handles dampers up to 16 square feet for proportional volume control and 25 square feet for two-position actuation, with 0 to 20 psig normal HVAC control air; construction is all-aluminium with a 2-way swivel head and a telescoping piston rod reaching attachment points up to 8-3/4 in. (222 mm) from the actuator face.

Specification note: Johnson Controls' ordering table for this series lists the D-3153-1, -2, -3, -4, -5, -6, -7 and -18 actuator models, plus the -6001/-6002/-6003 body-only codes. The -40 suffix is not among them, so we cannot state the spring range or mounting bracket configuration - and since spring range determines the control band, please confirm it before ordering and we will verify the model.

* Brand / Manufacturer: Johnson Controls
* Model / Part Number: D-3153-40
* Series: D-3153 / D-3000 Series pneumatic damper actuators
* Product Type: Pneumatic piston damper actuator
* Spring Range: Not established - please confirm
* Mounting Bracket: Not established - please confirm
* Maximum Damper Area: 16 sq ft proportional, 25 sq ft two-position (series specification)
* Control Air Pressure: 0 to 20 psig (normal HVAC)
* Documented Series Models: D-3153-1, -2, -3, -4, -5, -6, -7, -18; -6001/-6002/-6003 (body only)

Typical applications include outdoor air, return air and mixing box damper control on air handling units, and ventilating damper control on pneumatic systems. Please confirm the spring range required. Field repairs must not be made; contact Johnson Controls for a replacement body.. Johnson Controls. Johnson Controls. D-3153-40.

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/