Description
. . . . . The Johnson Controls AS-UNT120-0 is a Metasys Unitary Controller (UNT) from the low-ambient UNT120 family, an Application Specific Controller for single-zone and room-level HVAC equipment. The UNT120 configuration is the low-temperature version of the UNT110, with no analog outputs, and it is rated to operate down to -40°F rather than the 32°F floor of the standard models.
The UNT is a stand-alone digital controller that also communicates on the Metasys N2 Bus, so a Network Control Unit or operator workstation can share sensor data and schedules across the facility. Two banks of DIP switches configure the analog input points and set the N2 address. Binary outputs are triacs that switch 24 VAC to relays, solenoids and actuators; on the UNT120/121 series the terminal labelled TRIACS is the internal shared node of the triac outputs, allowing high-side or low-side switching. A two-wire Zone Bus lets a laptop or a Zone Terminal communicate with the controller, download its database and reach M100 Series motor actuators. Application configuration is built, downloaded and commissioned with HVAC PRO for Windows. Johnson Controls requires the UNT120 and UNT121 to be installed in a BZ-1000-7 or equivalent enclosure. As a -0 generation controller it is supported by the AS-ZTU100-0 Zone Terminal.
* Brand / Manufacturer: Johnson Controls
* Model / Part Number: AS-UNT120-0
* Series: Metasys UNT Series Application Specific Controller
* Product Type: Low-ambient unitary controller
* Analog Outputs: 0
* Binary Outputs: 24 VAC triacs
* Supply Power: 24 VAC, 50/60 Hz
* Communication: Metasys N2 Bus; 2-wire Zone Bus for room sensor and service tool
* Required Enclosure: BZ-1000-7 or equivalent
* Generation: -0 series (supported by AS-ZTU100-0 Zone Terminal)
* Configuration Software: HVAC PRO for Windows
* Agency Listings: UL Listed and CSA Certified as part of the Metasys Network
Typical applications include rooftop units, outdoor air handlers, make-up air units, heat pumps and other exposed equipment locations where the controller must operate below freezing, with staged on/off control of fans, valves and electric heat.. Johnson Controls. Johnson Controls. AS-UNT120-0.
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/