null
/
Sale

Honeywell

Honeywell Y8610U4001 Intermittent Pilot Conversion Kit [New]

Write a Review
$516.47
SKU:
B2E-LFX-160883
Availability:
In Stock - Ships Immediately
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Description

The Honeywell Y8610U4001 is a complete intermittent pilot retrofit kit used to convert a conventional standing-pilot gas appliance to intermittent pilot ignition. Because the pilot only burns when there is a call for heat, the conversion eliminates the year-round standing pilot flame and the fuel it consumes.

The kit is built around the S8610U universal intermittent pilot ignition module and a VR8304M dual-valve combination gas control, and ships with the pilot burner hardware, igniter-sensor, a 30 in. ignition cable and a 30 in. wiring harness with 1/4 in. quick-connect terminals, so no separate control matching is required. It meets ANSI Z21.71 for field-installed automatic intermittent pilot ignition systems and provides 100% pilot gas shutoff if the pilot fails to light: after roughly a 90-second trial the pilot gas closes for about five to six minutes, then the trial repeats on continuous retry until the appliance lights or the call for heat is removed.

* Brand / Manufacturer: Honeywell
* Model Number: Y8610U4001
* Product Type: Intermittent pilot retrofit / conversion kit
* Ignition Module: S8610U universal intermittent pilot module
* Gas Control: VR8304M dual-valve combination gas control
* Control Voltage: 24 Vac, 60 Hz
* Gas Types: Natural or LP gas
* Ignition Source: Internal high-voltage spark generator
* Ignition Sequence: Continuous retry, 100% pilot gas shutoff
* Flame Failure Response: 2 seconds
* Standards: ANSI Z21.71

Intended for gas-fired atmospheric furnaces, boilers and heating appliances. Not for direct vent, induced draft or power burner equipment, and step-opening gas controls cannot be converted. Kit dash numbers differ in gas control capacity, pilot hardware and pipe size, so verify the appliance's valve size and inlet configuration before ordering.

Honeywell / Honeywell

Y8610U4001 / Y8610U4001

Y8610U4001 / Y8610U4001

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/