![Honeywell WFS-8001-H Water Flow Switch, SPDT Paddle Type [New]](https://cdn11.bigcommerce.com/s-hdj6s/images/stencil/500x659/products/68591/140138/6299ee37-e46b-52d7-a417-3b8a561f2c4f__76327.1790047476.jpg?c=2 "Honeywell WFS-8001-H Water Flow Switch, SPDT Paddle Type [New]")
Description
The Honeywell WFS-8001-H is a paddle-type water flow switch from the Honeywell WFS series - a flow-proving safety and control device, not a valve. The paddle-type SPDT WFS series switches are designed to provide accurate and reliable flow control for liquid lines, monitoring and switching circuits when flow rates rise above or drop below the adjusted level.
Flow switches of this type are used to prove that water is actually circulating before allowing a boiler, chiller or heater to fire, and to shut equipment down or raise an alarm if flow is lost. The paddle sits in the pipe run and moves with the flow stream, operating a snap-acting SPDT switch.
WFS series switches mount horizontally or vertically in a pipe section with at least five pipe diameters of straight pipe either side, and the trip point is adjusted by removing the cover and turning the range adjusting screw.
* Brand / Manufacturer: Honeywell
* Model Number: WFS-8001-H
* Series: WFS Water Flow Switches
* Product Type: Paddle-type liquid flow switch
* Switch Type: SPDT
* Media: Water or other non-hazardous fluids
* Mounting: Horizontal or vertical, minimum 5 pipe diameters of straight pipe each side
* Adjustment: Range adjusting screw under the cover
* Condition: New surplus
Typical applications include flow proving on boilers, chillers, heat exchangers and pumped water circuits, and low-flow alarm on process cooling lines.
Please note: Honeywell's operating instructions for this range cover the WFS-1001-H, WFS-1002-H and WFS-1003-H models. The 8001 dash held here is outside that documented group, so pipe size, electrical rating and maximum operating pressure could not be confirmed and are not stated. Do not assume it matches the WFS-1001-H (1 in., SPDT, 15 A at 250 Vac, 1 MPa). Please verify the pipe size and ratings against the label on the physical unit before ordering.. Honeywell. Honeywell. WFS-8001-H.
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
