Name: Honeywell W7751H3007 Excel 10 VAV Controller w/ Actuator [New]
Brand: Honeywell
SKU: B2E-LFX-160804
Price: 760.3 USD
Availability: InStock

Description

The Honeywell W7751H3007 is an Excel 10 VAV Controller with integral damper actuator. Honeywell specifies that the actuator included with the W7751H mounts directly onto the VAV box damper shaft and delivers up to 70 lb-in torque with a 90 degree stroke and 90 second travel time, removing the need to source and link a separate actuator.

Honeywell describes the W7751H controllers as providing pressure independent or dependent airflow control and series and parallel fan control with one and two duct applications. Additional outputs operate VAV box reheat coils - three-stage electric or modulating hot water - and supply and exhaust pressurization control is provided on a zone basis.

The controller uses a microbridge airflow sensor with a patented dual integral restrictor design, communicates over Echelon LonWorks using Free Topology Transceiver technology, and is compliant with the LonMark VAV Controller profile. Pre-programmed control algorithms are selected using the E-Vision software configuration tool.

* Brand / Manufacturer: Honeywell
* Model Number: W7751H3007
* Series: Excel 10 W7751 VAV Controllers
* Product Type: VAV terminal unit controller with integral actuator
* Actuator: Included; up to 70 lb-in torque, 90 degree stroke, 90 second travel
* Airflow Control: Pressure independent or pressure dependent
* Fan Control: Series and parallel fan
* Duct Configuration: One and two duct applications
* Reheat Outputs: Three-stage electric or modulating hot water
* Airflow Sensor: Microbridge sensor with patented dual integral restrictor design
* Network: Echelon LonWorks, Free Topology Transceiver (FTT)
* Interoperability: LonMark VAV Controller profile
* Configuration Tool: E-Vision software

Typical applications include single duct and dual duct VAV terminal units in commercial buildings.

Please note: this dash number sits in the 3xxx block while the other W7751H units held here are 2xxx (2009, 2017, 2025). A different dash block often indicates a different configuration generation or factory parameter set, so confirm the dash number against the controller you are replacing before ordering.. Honeywell. Honeywell. W7751H3007.

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/