Name: Honeywell W7100E10053 Discharge Air Controller, 24V [New]
Brand: Honeywell
SKU: B2E-LFX-161549
Price: 3443.62 USD
Availability: InStock

Description

The Honeywell W7100E10053 is a microprocessor-based discharge air controller from the W7100 series, used to maintain an average discharge air temperature in variable air volume (VAV) cooling systems by modulating an economizer and sequencing stages of mechanical cooling. It can also be applied to electric make-up air and other systems requiring discharge air control of multistage heating or cooling.

The controller reduces kilowatt demand and consumption by holding only the minimum heating or cooling capacity needed to maintain the discharge air setpoint. On a power interruption the system cycles all stages off; when power is restored the economizer is modulated open first if enthalpy is suitable, then mechanical cooling stages are sequenced on.

Important difference for the E model: unlike the W7100A and W7100C, the W7100E cannot be expanded with a W7101 Satellite Sequencer. If additional stages are required, an A or C model is needed instead.

* Brand / Manufacturer: Honeywell
* Model Number: W7100E10053
* Series: W7100 Discharge Air Controllers
* Power Consumption: 12 VA at 24 Vac, 50 to 60 Hz
* Switching: SPDT relays for on/off stages
* Wiring Terminals: 1/4 in. (6 mm) quick-connect
* Adjustable Control Band: 2 to 16°F
* Discharge Air Setpoint: Adjustable 40 to 90°F
* Reset Signal Source: Space sensor or outdoor air sensor
* Staging Expansion: Not available - W7101 Satellite Sequencer is not compatible with W7100E
* Approvals: UL Component Recognized (guide SDFY2, file SA481); CSA Certified

Typical applications include VAV cooling systems, electric make-up air units and multistage heating or cooling systems requiring discharge air control.

Please note - part number requires verification. This dash number has five digits (10053), where documented Honeywell W7100 parts use four (for example W7100A1053, W7100A1087, W7100C1018). That may indicate a transcription error - possibly W7100E1005. Stage count is also not published for this model. Please verify the part number and staging against the label on the physical unit before ordering.. Honeywell. Honeywell. W7100E10053.

Warranty Information

B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.

Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/

Our complete return policy page is located here: https://www.b2esurplus.com/returns/