Description
The VR8200H1251 is a 24 Vac standing pilot combination gas control from Honeywell's VR8200 series.
The VR8200 is Honeywell's 24 Vac continuous pilot dual automatic valve combination gas control, covered by product data form 68-0046. It is used on standing pilot appliances up to 200 cf/h of natural gas, and combines a safety shutoff, a manual valve, two automatic operators, a servo pressure regulator and a pilot adjustment in a single body. The manual knob has three positions: OFF, PILOT, which passes pilot gas only, and ON, which passes pilot and main burner gas under the control of the thermostat.
The letter after the family number is the single most important character on a VR8200. It sets how the second automatic valve opens: A and M are standard opening, H is slow opening, J is delayed and slow opening, and C and P are step opening. Substituting one letter for another changes the burner's light-up behaviour even though the bodies look identical.
Slow opening explained. A slow-opening control works exactly like a standard model except that the second automatic valve opens gradually. A gas flow restrictor slows the rate at which pressure is relieved under the valve diaphragm, so outlet pressure to the main burner climbs from zero to its rated setting over roughly three to six seconds - Honeywell quotes that figure for an 80,000 Btuh furnace at 7 in. wc inlet and 3.5 in. wc outlet pressure. The effect is a soft light rather than an abrupt one.
* Brand / Manufacturer: Honeywell
* Model Number: VR8200H1251
* Series: VR8200 Continuous Pilot Combination Gas Controls
* Ignition Type: Standing (continuous) pilot
* Opening Characteristic: H suffix: slow opening
* Supply Voltage: 24 Vac, 60 Hz
* Current Draw: 0.5 A
* Body Pattern: Straight through
* Inlet / Outlet: 1/2 in. x 1/2 in.
* Capacity: 130 cf/h at 1 in. wc pressure drop
* Maximum Regulated Capacity: 200 cf/h
* Pressure Rating: AGA rated 1/2 psi (3.5 kPa) inlet
* Screens and Filter: Inlet and outlet screens and pilot filter included
* Pressure Taps: Inlet and outlet pressure taps provided
* Pilot Fitting: 1/4 in. compression
* Terminal Block: Beige, denoting standing pilot service
* Gas Conversion: Field convertible: kit 393691 natural to LP, kit 394588 LP to natural
* Certification: AGA design certificate L2025006; Australian design certificate 4214
* Condition: New
Two points before you order. The VR8200 is a 24 V control - the matching 120 V part is the VR4200, and the two are outwardly similar. And Resideo has discontinued the VR8200 line, so these are service and replacement stock rather than a current catalogue item.
Ordering note: Dash number 1251 is not individually documented. Unlike the step-opening C models on rows 416 and 417, slow-opening controls are field convertible between natural and LP gas using kits 393691 and 394588. Confirm the full part number against the appliance nameplate before ordering.
Honeywell / Honeywell
VR8200H1251 / VR8200H1251
VR8200H1251 / VR8200H1251
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/