Description
The VP531C1042 is a normally-open pneumatic terminal unit valve from Honeywell's VP531 series, used for proportional control of chilled or hot water at terminal units.
VP531A and VP531C Pneumatic Terminal Unit Valves are normally open, single-seated two-way valves used for proportional control of chilled or hot water at terminal units such as fan coils, unit ventilators and reheat coils. Air pressure on a direct-acting rolling diaphragm actuator closes the valve, so on loss of control air it drives open. The body is rated to 250 psi and the maximum safe air pressure is 30 psi.
The rolling diaphragm actuator is the defining feature of the range: it gives a long, smooth stroke at low air pressure, which is what allows accurate proportional control on the small flows typical of terminal-unit duty. The VP531 also superseded the solder-body VP525A valves that Honeywell inactivated in 1976, so it is the current answer for that older installed base. Replacement diaphragms are shared with the VP525A/C, VP526A and VP527A pneumatic valves.
* Brand / Manufacturer: Honeywell
* Model Number: VP531C1042
* Series: VP531 Pneumatic Terminal Unit Valves
* Product Type: Two-way pneumatic terminal unit valve
* Action: Normally open, air pressure to close
* Seat: Single-seated
* Actuator: Direct-acting rolling diaphragm
* Body Pressure Rating: 250 psi
* Maximum Safe Air Pressure: 30 psi
* Medium: Chilled or hot water
* Control: Proportional, pneumatic
* Application: Fan coils, unit ventilators, reheat coils and other terminal units
* Condition: New
Ordering note: Pipe size, flow coefficient and spring range are not stated above and are not published against this dash number. Confirm all three before ordering. As with the other VP531 rows, do not treat the A and C suffixes as interchangeable: both are genuine Honeywell variants but the published literature does not explain how they differ, so substituting one for the other risks a mismatch on temperature rating or trim.
Honeywell / Honeywell
VP531C1042 / VP531C1042
VP531C1042 / VP531C1042
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a ""surplus"", ""discount"", ""liquidator"", or ""gray market"" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/