Honeywell M436A1116 Tradeline Damper Motor. 2 Position Spring Return. 120 Volts, 60 Hertz. 75 deg Stroke. . Spring return motors for two-position back draft, outdoor air changeover, zone, or minimum position damper control. - FEATURES: Operate outdoor air dampers for combustion or makeup air in residential and light commercial applications. Operate changeover dampers for heating and cooling systems. Operate minimum position dampers for ventilation and similar applications. Include internal SPDT switch for controlling auxiliary equipment, additional motors, or to provide a burner interlock switch. Spring returns motor to start position on power failure. Drive shafts located on both sides of motor. Adjustable auxiliary switch for cascading motors or operating auxiliary equipment. Thermal breaker for overload protection during lifting stroke or if motor stalls. SPECIFICATIONS: Dimensions (in.): 4 1/2 in. high x 4 5/8 in. wide x 3 3/4 in. deep. Dimensions (mm): 114 mm high x 118 mm wide x 95 mm deep. Weight (lb): 4 lb 10 oz. Weight (kg): 2.1 kg. Mounting: Foot-mounted. Frequency: 60 Hz. Approvals, Underwriters Laboratories Inc. Listed File: E4436, Guide: XAPX. Tradeline Value: Tradeline. Electrical Connections: Screw terminals. Operating Humidity Range (% RH): 5 to 95% RH. Supply Voltage: 120 Vac. Operating Temperature Range (F): 32 F to 125 F. Operating Temperature Range (C)0 C to 52 CTimingRun Time Maximum-- 40 secInternal Auxiliary Switch1StrokeAngle of Rotation-- 75 degrees maximumControl SignalTwo position, SPSTFail Safe ModeSpring ReturnTorque Rating (lb-in.)20 lb-in.Torque Rating (Nm)2.3 NmAdditional Torque Ratings (lb-in.)Breakaway-- 30 lb-in.Additional Torque Ratings (Nm)Breakaway-- 3.3 NmExternal Auxiliary Switches AvailableYesTiming, NominalOpening-- 30 secSpring Return TimingMaximum-- 25 sec Nominal Current Draw (amps) Opening-- 0.37 A, Holding-- 0.12 A Nominal Power (watts)Opening-- 28 W, Holding-- 8.5 W Motor shafts2, Hexagonal shape. Honeywell. Honeywell. M436A1116.
Warranty Information
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERÂ’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUSÂ’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E SurplusÂ’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
