Description
The refurbished Automated Logic LGR1000 is a high-speed Ethernet BACnet router and gateway for building-control system integration. It can connect hundreds of control modules to a BACnet/IP backbone and supports up to 1,000 points. Its 10/100Base-T Fast Ethernet connection allows it to serve as a BACnet router between a BACnet/IP system backbone and field-device subnetworks.
The LGR1000 supports BACnet/IP, BACnet-over-Ethernet, ARCNET at 156 Kbps, BACnet MS/TP, and BACnet PTP communications. It can route messages from BACnet/IP to BACnet-over-Ethernet, supporting integration with older BACnet systems. Open and proprietary protocol translator drivers also allow it to serve as a gateway for other manufacturers' equipment.
Fully programmable operation lets the LGR1000 execute complex control strategies for high-level system integration. It can support hundreds of individual control programs written in ALC EIKON-LogicBuilder Graphic Programming Language. A 32-bit microprocessor with cache memory, Fast Ethernet controller, 32-bit serial communications co-processor, and ARCNET communications co-processor support translation, communications, and control functions.
The controller includes 16 MB of battery-backed SDRAM, with 12 MB available for application programs, trends, and other data, plus 8 MB of Flash memory for field upgrades over the network. A battery-backed real-time clock supports standalone operation and continuity through power failures. Local access is available through the Rnet port, which supports Automated Logic RS room sensors and the BACview6 local operator interface, as well as through an EIA-232 port. Its rugged aluminum cover provides electrical protection and noise immunity.
- Refurbished Automated Logic LGR1000 high-speed BACnet router/gateway
- Supports up to 1,000 points and connects hundreds of control modules
- Supports BACnet/IP, BACnet-over-Ethernet, ARCNET 156 Kbps, MS/TP, and BACnet PTP
- 10/100Base-T Fast Ethernet for BACnet/IP backbone and field-device subnetworks
- Protocol translator drivers for gateway integration with other manufacturers' equipment
- Fully programmable for complex control strategies and EIKON-LogicBuilder programs
- 16 MB battery-backed SDRAM and 8 MB Flash memory for network field upgrades
- Rnet port for Automated Logic RS room sensors and BACview6 local operator interface
- Rugged aluminum cover for electrical protection and noise immunity
Warranty Information
B2E Surplus includes a 90-day return window on all orders. If you have any issues with your order, automated returns can be opened by following the instructions located here: https://www.b2esurplus.com/returns/
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
B2E Surplus LLC is a non-authorized stocking distributor for this brand. We are also known as a "surplus", "discount", "liquidator", or "gray market" supplier. We are not a factory-authorized distributor of this product. The Original Manufacturer’s Warranty does not apply. B2E Surplus LLC's standard 90-day warranty will apply. B2E Surplus LLC makes no representations as to your ability or right to download, re-distribute, or otherwise obtain products from this manufacturer, its distributors, or any other source. It is your obligation to comply with the terms of any rules obtaining or installing this product.
Our complete warranty statement page is located here: https://www.b2esurplus.com/warranty/
Our complete return policy page is located here: https://www.b2esurplus.com/returns/
