Range: Modicon Quantum PAC. Single Axis Motion Module. 1 Axis Real, 1 Axis Remote. Differential Encoder 5V. . SPECIFICATIONS: Range of Product: Modicon Quantum Automation Platform. Product or Component Type: Single Axis Motion Module. Encoder Type: Differential, Complementary. Number of Axis: 1 Real, 1 Remote. Axis Function: Synchronization of Master/Slave Speed and Position, Automatic Control of Linear, Rotary, or Continuous Axes. Axis Positioning Range: 4294967296 Points. axis Positioning Range Units: Inches, Mm. Acquisition Speed: 1...4294967296 points. Axis Speed Units: Counts/s, Mm/s, Inches/s, Rpm. Axis Update: 1 ms Position Loop, 0.5 ms Speed Loop. Maximum System Accuracy: 0.5 arc/min Encoder Dependant. Axis Motion: 28 traversing programs, Relative movement, Continuous movement, 650 flash memory commands, Absolute movement, Homing movement. Checks: Point window, Position captures (stops), Encoder interface, Loop position control, Logical stops. Register Words: 4 output words, 3 input words. Encoder Voltage: 5 V +/- 20 %. Encoder Impedance: 500 Ohm. Incremental Encoder Frequency x1: < = 500 kHz. Incremental Encoder Frequency x4: < = 2000 kHz. Analogue Output Type: Bipolar output +/- 10...24 V 11 bits + sign servo interface. Discrete Output Type: Drive enable output < = 30 V, Auxiliary Output 3 24 V 150 mA, Drive Enable Output 24 V 500 mA Servo Interface. Discrete Input Type: Auxiliary input 7 24 V, Drive Fault Input 5 V TTL servo interface, Dry Contact OT Input. Analogue Input Range: +/- 10...24 V 30000 Ohm Auxiliary Input. Analogue Output Range: +/- 10...24 V 11 bits + sign 0.003 A Auxiliary Output. Position capture time: 250 ms high speed input. Impulse Duration: 25 ms high speed input. Time between capture: > = 20 ms high speed input. Communication port protocol: Modbus Serial line slave RS232D 300..9600 bit/s. Local signalling: 1 digital indicator Modbus plus status, 3 LEDs output status, 7 LEDs input status. UPC: 359586127210. Electrical Connection: 1 connector SUB-D 50 connection to servo drive, 1 connector SUB-D 9 RS232D Modbus link.. Schneider Automation Inc. Schneider Automation Inc. 140MSB10100. UPC: 683194543494. EAN: 0683194543494. GTIN: 00683194543494.
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (Products) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERS SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
This product hasn't received any reviews yet. Be the first to review this product!