Sensing Head Size: M18. Type: Shielded. Sensing Distance: 7 mm-10% to +10%. Setting Distance: 0 to 5.6 mm. Operation Mode: NO. Inductive type, Shielded, M18*1mm, DC 2-wire models, Sensing distance 7 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(2 m); Type: Shielded; Sensing method: Inductive type; Sensing distance: 7 mm-10% to +10%; Setting distance: 0 to 5.6 mm; Differential distance: 10% Max. of sensing distance; Sensing object: Ferrous metal (Sensitivity lowers with non-ferrous metals.); Standard sensing object: Iron 18 x 18 x 1 mm; Power supply voltage: 12 to 24 VDC ripple(p-p) 10% Max.; Operating voltage range: 10 to 30 VDC; Leakage current: 0.8 mA max.; Control output (Output type): DC 2-wire models with polarity; Control output (Switching capacity): 3 to 100 mA; Indicator: Operation indicator (red), Operation setting indicator (green); Operation mode: NO; Protective circuit: Surge suppressor, Output short-cut protection; Standard or Different frequency: Standard; Ambient temperature: Operating: -25 to 70 ?, Storage: -40 to 85 ?; Ambient humidity: Operating: 35 to 95%RH, Storage: 3595%RH; Temperature influence: +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL (As the basis for sensing distance of 23 CEL); Voltage influence: +/- 1% Max. of sensing distance in rated voltage range +/- 15%. (As the basis for sensing distance at standard power voltage); Insulation resistance: 50 MOhm Min. at 500 VDC between charged parts and the case; Dielectric strength: 1000 VAC 50/60 Hz for 1 minute between charged parts and the case; Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions; Shock resistance: 1000 m/s**2 for 10 times each in X, Y, and Z directions; Degree of protection: IEC60529: IP67; Company standard: Oil-proof; Connection method: Pre-wired models(Cable length: 2 m); Weight (Packed state): approx. 130 g; Material (case): Brass nickel plating; Material (sensing surface): PBT; Material (clamping nuts): Brass nickel plating; Material (toothed washer): Iron zinc plating Omron. Omron Corporation. E2E-X7D1-N 2M.
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (Products) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERS SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
This product hasn't received any reviews yet. Be the first to review this product!