Capacity: Six M series plug-in modules. Terminal Capacity: 12 AWG (2.5 sq mm) to 18 AWG (0.75 sq mm). Compatible Boxes: MFC-A, 2-WB(X) series, 3-CAB series, RACCR series, 3-RCC series, or any UL listed fire alarm enclosure that meets clearance requirements below and complies with the "Installation Instructions". Clearance Space: 1 inch minimum all around the UIO6 or UIO6R, 1/2 inch above the M series modules, and in accordance with the National Electrical Code. Dimensions (H x W x D): 4.30 in (10.9 cm) x 9.56 in (24.28 cm) x 0.87 in (2.2 cm) + 2.25 in (5.7 cm) module depth. The Signature Series Universal Input/Output Motherboards (models UIO6 and UIO6R) provide mounting and wiring terminations for up to six M series modules. See Table 1 for a list of model numbers. The UIO6 provides two input/output buses common to all modules (TB14 and TB15). The UIO6R provides one input/output bus common to all modules (TB15) and six individual inputs/outputs (TB8 through TB13) for flexibility. Jumpers, located between the modules, facilitate sharing of common inputs/outputs between adjacent modules to minimize wiring. Both boards provide six terminal blocks to handle the inputs and outputs for individual modules installed on the motherboard (TB1 through TB6). The Signature Data Circuit (SDC), which provides communication to all the modules, is connected at a single location (TB7). The motherboard mounts in an MFC-A cabinet or other suitable equipment enclosure with screws and washers provided. Each MFC-A will hold one UIO6 or UIO6R motherboard complete with their full complement of modules. See Specifications for a list of compatible enclosures. Modules plug into the motherboard at any of the six locations, and captive screws fasten them to the motherboard. All module field wiring goes to terminal blocks on the motherboard to permit rapid removal and replacement for troubleshooting. Operating Environment: Temperature: 32 to 120 degF (0 to 49 degC), Humidity: 93% RH, noncondensing at 90 degF (32 degC), Storage Temperature: -4 to 140 degF (-20 to 60 degC). Landis and Gyr (Now Part of Edwards and Honeywell). Landis and Gyr. Landis and Gyr. SIGA-UIO6-LG.
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (Products) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERS SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
This product hasn't received any reviews yet. Be the first to review this product!