The XTM-105 Extension Module and XPx-xxx Expansion Modules combine the functions of relays, signal conditioners, and overrides for controlling building operations (Figure 1). The XTM-105 module provides the communications interface and the XP modules provide the analog, binary, and multistate inputs and outputs. Incremental point additions with up to 40 input/output points per N2 connection are allowed. The supervisory system communicates with the XTM-105 via the N2 Bus. The XTM-105 can be configured using a Personal Computer (PC) with the XTM Configurator software or by downloading a previously defined configuration. When the XTM-105 is powered up, it automatically reads which XPx modules are connected and compares this data with the I/O Type Map. For details on the XTM Configurator software, refer to the XTM Configurator Technical Bulletin (Code No. LIT-6364220). Magnetic and electric latching relays are available to assure proper restart conditions in the event of power failure. Many models include manual override for temporary on-site adjustments. Light-Emitting Diodes (LEDs) show the command status of the points.
Johnson Controls offers versions of the XTM-105/XPx-xxx that meet various market specifications (Table 32). The modules offered in North and South America (Table 30) are a subset of those available in other markets and all have been tested for UL, CSA, and FCC agency listings. If you need a module not listed in Table 30 of Appendix C: Ordering Information, have your local Johnson Controls representative contact the product development team in Milwaukee. If there is sufficient demand, additional models may be made available for your market. The disconnect terminals are a requirement in the German market. They allow the electrician to wire the modules without having the wire electrically connected to the module. Each terminal has a blade switch that is permanently connected to the module (Figure 39). The only difference between the modules with disconnect terminals and those without is the extra height of the body, which is needed to accommodate the larger disconnect terminal blocks. The characteristics and specifications of the two types of modules are otherwise identical.. Johnson Controls. Johnson Controls. XPM-411-5.
Warranty Information
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERÂ’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUSÂ’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E SurplusÂ’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
