Flow Range: 0-2.5 L/min. Inlet/Outlet Port Connection: 1/2 Inch Flaretek. Electrical Connector Type: FEP-jacketed 6' pigtail electrical cable. Setpoint Input Signal, Controller Type: 4 - 20 mA, batch. Sensor Interface: P1, Primary/Secondary Seal Code: U1, Design Code: M29. NT Integrated Flow Controllers, Model 6500 - The patented NT Integrated Flow Controller, Model 6500 is a leading-edge liquid flow controller that allows for greater control of your process flow variables in legacy applications. FEATURES: PTFE wetted surfaces for high purity applications. Nonmetallic components offer corrosion resistance. Integral pressure transducer provides additional process information. Yields one percent (1%) full scale accuracy in critical dispense applications. The compact footprint offers easy field installations where space is limited. Gives fast response for accurate dispense rates. APPLICATIONS: Combined with our differential pressure based flowmeter and leading-edge control valve technology, this closed-loop flow controller is ideal for: Continuous flow control for critical dispense applications. Replacing existing peristaltic pumps for CMP slurry dispense. Batch control for chemical spiking and blending. On-demand chemical mixing applications. Materials: Wetted parts: Body: PTFE. Diaphragms: PTFE. Sensor interface: PFA or CTFE. Primary o-ring: Kalrez. Nonwetted parts: Polypropylene, FEP,PVDF and Viton (In addition to materials listed above.). Process temperature: 10-65°C (50 to 149°F). Electrical input: 24 VDC (±10%) at 1 amp, 24 VDC (±10%) at 1.15 amp for DeviceNet. Electrical output: Two 4-20 mA electrically isolated outputs, one for flow and one for pressure or DeviceNet communication. Flow measurement: ±1% of full scale from 20 to 100% of flow range, ±2.5% of full scale from 10 to 20% of flow range, [Calibrated using deionized water at 23°C (73°F)]. Repeatability: ±0.5% of full scale from 20 to 100% of flow range, ±1% of full scale from 10 to 20% of flow range. Pressure measurement range: 0-414 kPa (0 to 60 psig). Minimum operating pressure (at the inlet): 69 kPa (10 psig). Maximim operating pressure: 414 kPa (60 psig). Over-pressure limit: 690 kPa (100 psig). Entegris. Entegris. 6500-T5-F04-B06-K-P1-U1-M29.
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (Products) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERS SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
This product hasn't received any reviews yet. Be the first to review this product!