Loading... Please wait...
  • Image 1
  • Image 2

Balluff BES M18MG-PSC16F-S04K BES0070 Inductive Sensor, PNP, NO, Non-Flush Mountable

$32.00
SKU:
9O-KDCW-HSJH
Condition:
New
Availability:
In Stock - Ships Immediately
Shipping:
Calculated at checkout
Current Stock:
4

 

Product Description

Inductive sensor, M18x65 mm, GlobalProx. DC, Direct Current. PNP / Normally Open (NO). Sn = 16 mm. Non Embeddable. SPECIFICATIONS: Eff. switching distance Sr 16,00 mm. Tolerance Sr ±10 %. Assured operating distance Sa 13,00 mm. Hysteresis H max. (in % of Sr) 20 %. Repeat accur. R max. (% of Sr) 5 %. Ambient temperature -25...70 °C. Temp. drift max. (% of Sr) 10%. Switching freq. f max. 800 Hz. Ready delay tv max. 20 ms. Utilisation category DC 13. Function indicator Yes. Power-on indicator No. Short-circuit protected Yes. Degree of protection as per IEC 60529 IP67. Protection class II. Protected against polarity reversal Yes. Protected against reverse connection Yes. Electrical data. Rated operating voltage Ue DC 24,0 V. Ripple max. (% of Ue) 15 %. Voltage drop static max. 2,5 V. Rated insulation voltage Ui 250 AC V. Effective operating current Ie 200 mA. No-load current Io damped 10 mA. No-load current Io undamped 3 mA. Off-state current Ir max. 10 µA. Minimum operating current Im 0 mA. Rated short circuit current 100 A. Output resistance Ra 33.0k + D. Load capacitance max. (at Ue) 0,5 µF. Principle of operation Inductive. Housing material CuZn. Surface protection Nickel-free coating. Sensing surface material PBT. Tightening torque max. 25 Nm / 35 Nm. Mounting length 40 mm. Connection type Connector. Connector type M12x1-S04. Shock rating Shock, half-sinus, 30 gn, 11ms. Vibration rating 55 Hz, 1 mm ampl., 3x30 min. Degree of contamination 3. Basic standard IEC 60947-5-2. The sensor is functional again after the overload has been eliminated. With connector, e.g. BKS-S 20-… total length = switch length +18 mm. Unshielded: See installation instructions for inductive sensors with extended switching distance 853924. Balluff. Balluff. BES M18MG-PSC16F-S04K.

Warranty Information

B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.

EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUS’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.

EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.

WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E Surplus’ designated service location.

LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write review

our newsletter

Click the button below to add the Balluff BES M18MG-PSC16F-S04K BES0070 Inductive Sensor, PNP, NO, Non-Flush Mountable to your wish list.