RSPL Room Sensor. Without LCD Display. Slide-Pot Set Point Adjustment. Local Override. . Key Features and Benefits All Room Sensors: Attractive, low profile enclosure in a neutral color complements any room. Precise 10K ohm thermistor with + 0.36F (0.2 C) standard accuracy and less than 0.18 F (0.01 C) drift over a ten year span - requires no maintenance or re-calibration. A hidden communication port allows a laptop computer to be connected to the HVAC Control System. Multiple RS room sensors can be daisy-chained to one controller for temperature averaging or high/low select control. (One RS Plus, RS Pro or RS Pro F with up to four RS Standards.) Mounts on a standard 2" by 4" electrical box for easy installation. RS Plus: Features a convenient local setpoint adjustment through an easy to use slide potentiometer. Occupancy override is simple using the momentary push button on the RS Plus with a bright LED for immediate indication of status. When the override button is pressed during an unoccupied mode, the zone reverts to an occupied setpoint for a predetermined period of time. RS Pro/RS Pro F: Large, easy-to-read LCD on the RS Pro displays zone temperature, outside air temperature, heating setpoint, cooling setpoint, and local override (after-hours occupancy) time. Occupancy override is easy using the "Manual On" momentary pushbutton on the RS Pro. A single push switches the zone to an Occupied mode for a preset period of time. Multiple pushes increases the override time, and the LCD displays precisely how long the zone will stay occupied. The occupied time per push and maximum override time are fully programmable in EIKON Zone setpoints can be easily changed on the RS Pro by pressing the "Warmer" or "Cooler" button. How much each push affects the setpoint and the maximum total adjustments are fully programmable in EIKON. Pressing the "Fan Speed" button on the RS Pro F incrementally adjusts the fan speed of the fan coil unit. The "Mode" button can be used to select among several zone operation modes as programmed in EIKON.. Automated Logic. Automated Logic Corporation. RSPL.
Warranty Information
B2E Surplus offers a 90-day warranty on all sales. Warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
Subject to the exclusions described below, all B2E Surplus products (“Products”) are warranted to be free from defects in materials and workmanship under normal use and service. Unless otherwise set forth in a quotation or agreed to by B2E Surplus in writing, standard Products are warranted for 90 days from the date of delivery to the buyer.
EXCLUSIVE REMEDY. In the event that B2E Surplus determines that a Product contains a defect in materials or workmanship, then B2E Surplus, in its sole discretion, will (a) repair the Product, (b) replace the Product, or (c) refund the purchase price of the Product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY OF REPAIR, REPLACEMENT OR REFUND IS BUYERÂ’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. IN NO EVENT SHALL B2E SURPLUSÂ’ LIABILITY UNDER THIS WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE WARRANTY CLAIM. All Products which are repaired or replaced shall be warranted only for the unexpired portion of the original warranty period.
EXCLUSIONS. This warranty does not cover (a) any failures which are not attributable to defects in materials or workmanship, including without limitation, failures caused by accidents, inadequate maintenance, misuse, unauthorized modifications or repairs, improper storage, and normal wear and tear, (b) any consumable parts or accessories, such as cutter blades, nut splitter chisels, punches, dies, chains, wedges, and strands, that are designed to wear over time or through use of the Product, or (c) electronics, motors, batteries, and engines, as these items are warranted by their manufacturer.
WARRANTY RETURNS. No Products shall be returned without prior authorization from B2E Surplus. Buyer shall prepay all shipping charges for the return of Products to B2E SurplusÂ’ designated service location.
LIMITATION OF LIABILITY. IN NO EVENT SHALL B2E SURPLUS BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. B2E SURPLUS' LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO ANY ORDER IS LIMITED TO THE ORDER PRICE FOR THE SPECIFIC PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS SHALL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OR LAW, OR OTHERWISE.
![ALC Automated Logic Corporation GCM2 Gateway Communication Module [Refurbished]](https://cdn11.bigcommerce.com/s-hdj6s/images/stencil/500x659/products/36361/80800/c9e74fa7-a29b-548f-8f4c-9f72d2919e3f__78893.1774637560.jpg?c=2 "ALC Automated Logic Corporation GCM2 Gateway Communication Module [Refurbished]")